While IGRINS is being stored it is desirable that the HKP be left running so the instrument status can be remotely monitored.
After the IGRINS storage procedure has been followed:
- Open a terminal window on the ICC and type “cd ~/igrins_admin”
- In a new terminal, the HKP can be started by typing:
- “cd ~/igrins_admin”
- Start the ICS Hub by opening a terminal and typing
- > cd ~/igrins_admin
- > sh run_icshub
- You should see the Hub open, and it will say:
- 'Update Obsdate', which doesn't matter in this case.
- Check mount - Fail or Okay
- Check Proxy - Fail or Okay
- Click 'run HKP'.
- Click “Periodic Monitoring” to begin temperature and pressure logging.
- Click 'Send Alert (T>30)' on the HKP window as long as the second coldhead is below that value. It the 2nd coldhead is above 30K, then email alerts will be sent.
- In another terminal, we need to have the HKP uploader running. It should always be running, but if the HKP monitor is not working, then start the script:
- open a terminal
- > cd ~/igrins_admin
- > sh run_hk2firebase.sh