Page tree
Skip to end of metadata
Go to start of metadata

Revised 10/25/06

Susanne Kraft

Configuring the Sony hdv deck to downconvert to SD from HDV and record in 30I AVID project

1. Restart the computer. Always a good idea.

2. Disconnect the 4pin Firewire cable from the back of the HDV deck

3. Note how to navigate through the HDV menus


8. Change the destination of where the project will be saved to the LanShare Click

on the Folder Icon


6. Connect the FireWire Cable in the back of the HDV deck.

7. Mount the LanShare

8. Change the destination of where the project will be saved to the LanShare Click

on the Folder Icon

'

Then select theLanshare drive and click OK


9. Make the Format of the project 30i NTSC name the project and click OK


10. If you are using a system with a AVID DNA Break Out Box like MOJO or Adrenaline the DNA needs to be turned off so that it reads 1394 If you are using a system w/o a DNA it should already read 1394 so don’t need to change this setting.