The First step is to do a Sequence Export that Matches the Sequence settings. This will be your VIDEO file that you will combine with your surround sound mix. |  |
Check your Sequence Settings >Sequence Settings |
|
Set your sequence settings to this!! Your frame size could be different depending on what you shot but it needs to match the Video Previews box. ex:
Set the Video Previews Settings to QuickTime and Apple Proress 4444 Cllick on "Reset" so it matches the Video Frame size Again: The frame size of the Video is the resolution of the timeline and the Video Previews needs to match Double check that it matches as it does in this example. Click Reset to change the Video Previews size after you change the Preview File Format to QuickTime Apple ProRes 4444 |
|
| Click OK here. |
|
Select the final timeline you want to export and choose >File>Export>Media |
|
On The Export Settings choose >Match Sequence Settings >Click on the Output Name |
|
| Choose the destination for the file Save it to your storage drive etc. . . |
|
Click on Export When that is finished you are going to re import that file back into Premiere |
|
Import the 5.1 Interleaved File into your Premiere Project |
|
Select the file and import |
|
| Import the Video File you just exported that matched the Sequence Settings |
|
Click on the New Item and choose Sequence |
|
Choose Sequence |
|
Choose DNxHR HQ 2K 23.976 |
|
Click on the Settings TAB Choose Custom 1998 x 1080 settings for FLAT DCP's or 2048 x 858 for SCOPE DCP's DONT' HIT OKAY YET |
|
Go to the Video Previews |
|
Change the Codec to Apple ProRes 4444 |
|
DCP – Settings - Double check to make sure this all looks correct
Video Previews need to match these settings as well Preview File Format to QuickTime Then click on Reset and that will change the Width and Height to match Video Custom Settings. DONT' HIT OKAY YET |
|
CLICK ON THE TRACKS TAB NEXT Click on the Tracks Tab and then delete the audio tracks DONT' HIT OKAY YET |
|
Set Video to 1 track |
|
Change the Track Type of the one audio track to 5.1 |
|
Title the sequence and click OK |
|
Double click the video 2K or 4K file to load it into the source monitor Drag the Video Only icon to your newly created timeline |
|
| Choose to Keep existing settings |
|
Then load the sound mix (5.1 Interleaved) file into the source monitor and drag the audio only tracks to the timeline Place on the 5.1 track in the new sequence you just made |
|
YOU will be only able to check audio tracks 1 and 2 so you won't hear dialog but hopefully you can tell well enough.The final check will be the QuickTime you will make next.REMEMBERDELETE THE 2 POP AT THE BEGINNING AND AT THE END |
|
Scaling YOU WILL HAVE TO SCALE YOUR FILE Click on the Effects tab |  |
Click on your video file in the timeline Drop down the Motion setting and on scale select that parameter |
|
| Scale the image down to 50% or until you see black around the frame then scale it up till you don't see any black |
|
Don't want to see this small black edge around your image Don't want this black line
|
|
No black line this is what you want
|
|
Make sure the sequence is loaded in the Timeline Window and then select the timeline window so it's Highlighted Blue |
|
Go to >File >Export>Media |
|
| Choose Format QuickTime |
|
| Choose to Export Video and Export Audio |  |
Click on the Video tab and choose the Video Codec as Apple ProRes 4444 |
|
Go to Video>Basic Video Settings Change to 2048 x 858 scope moviesChange to 1998 x 1080 for Flat movies23.976Field Order - Progressive Aspect - Square Pixels |
|
Then change the settings to Video Codec Apple ProRes 4444 Change to 2048 x 858 scope moviesChange to 1998 x 1080 for Flat movies23.976 |
|
Click on Output Name - and choose where you want to save the file. DONT' CLICK EXPORT YET |
|
Click on Audio tab and choose |
|
Sample Rate 48 |
|
| Audio Channel Configuration |
Choose Export |
|
You may find other ways to do this on the internet. Ways that may seem legit, from legit organizations, like this one: |
Overview
Content Tools
