The University Wiki Service has upgraded the Confluence Server software, from version 5.9.14 to 5.10.8. Please refer to the knowledge base article, KB0015891, for a high level summary of upgrade changes. Thank you!

Page tree
Skip to end of metadata
Go to start of metadata

Log into EditShare

Producing Class Student or TA must do this step.

Go to >Mac HD Applications>

Choose Loginto Editshare-2014

Double Click the icon

The EditShare Connect Icon will appear


If the IP Address is not loaded run the

Loginto EditShare-2014 again

Second time should load the IP address

When the app is run again the IP will show up in the server address shown here.





YOU CAN ALWAYS TYPE IN THIS IP
172.17.66.133 IF YOU NEED TO

Put in your EID as the User Name and 335 as the Password


Select Log In to log in

Mount Both Shares here

Pull down the drop down to afp to mount the share on both 335 and 330

Go to >Applications>Final Cut Pro

A new Final Cut project will open

This is the default Sequence Preset

This is what you should use.

Blackmagic HDTV 1080i 59.94 – 8bit

Click OK

Click on Finder

Click on es-16tbenergy
on the sidebar>

Choose
TV-PROD-335_1

Drag the PSA's for 2014-2015 folder to the Final Cut Pro Project

Next go into the Final Show Elements>Find todays Show>Called Show#?

Drag that folder over to the Open Final Cut Project

This is how your project should look

Go to >File>Save Project

Call it Playback A or Playback B depending on what IMac you are using

Save on the tempstorage drive

Mark each clip in the show folder with a color that will be played on DVR1 or DVR2

Green for DVR 1
Red for DVR 2

HIGHLIGHT your News Rundown as "DVR1" or "DVR2"
(Don't forget the PSA {breaks} assigned to your machine. These go in order: PSA Reel A, B, C, then D.)

To highlight a clip right click on it and choose >Label>Red or Green

These are correctly labeled clips

Drag & Drop ONLY your Green for Playback A or Red for Playback B HIGHLIGHTED choices
(in the order listed on your rundown) into the TIMELINE leaving spaces between each clip.

When you drag a clip into the timeline you will be prompted to change the sequence settings.

Choose NO!



NOW YOU"RE READY TO BEGIN TODAY'S SHOW !

When Cueing up each clip, be sure the play head is at the VERY FIRST frame of video.

You can tell by looking at the right angle bracket in the lower left hand corner of the Sequence viewer window.

VERBALLY call out to the director when you are "rolling".
When playing back the PSA reels VERBALLY call out the time remaining on each 2 minute segment.
The producer & director need to hear you say, " 1:30 left, ... 1 minute left, … 30 seconds, … 15 seconds, … 5, … 4, … 3 , ... etc."