No audio on Teaching Station microphones or speakers are off??? You have AMPs off most likely Go to the room where tech staff stores the Lectern in the back hallway to the left of the DMC 3.206 Screen in the Amp closet Locate Circuit B - labeled on the RACK RAILS on front side of RACK |
|
Locate Circuit D - labeled on the RACK RAILS on front side of RACK GO BEHIND THE RACK AFTER LOCATING B AND D POWER CIRCUTS WE WILL access THE CONTROLS FOR THESE CIRCUITS on the back |
|
Make sure the switch is set to LOCAL Then press the "Local Sequence Initiate" PRESS for a second or so really press the button! The power should restore on the Amps that are off. May take about 5-10 seconds NOTE Amps that are on will stay on |
|
Overview
Content Tools
