Page tree
Skip to end of metadata
Go to start of metadata
>Apple System Preferences

>Sound

Set Output to Focusrite Thunderbolt

Open Audio MIDI Setup

Click on HDMI > Output and make sure

The Source is Focusrite Thunderbolt

click on Configure Speakers

Make sure they are set to 5.1 Surround


Apply > Done

Open Davinci Resolve

When you get trough the prompts

Open a New Project or Existing Project

Click on Media Tab and add 5.1 clips to media pool

Find the 2K clip with the 5.1 interleaved audio that was exported


Right click it and choose "Add into Media Pool"

Choose to Change the frame rate

Click "Change"

Next - Go to the Edit Tab

Right click in the Media Pool area

>Choose >Timeline>CreateNew Timeline

Set the Timeline to be 1 Video Track

1 audio track that is 5.1


Uncheck Empty Timeline

Click on "Create"

>Davinci Resolve

>Preferences

Click on Video and Audio I/O

Assign Video and Audio I/O to UltraStudio 4K


Audio Interface set to Fairlight Audio Interface and MADI

you must close project and quit Resolve before

you can setup speaker setup


Speaker Setup

Manual

MAIN

Focusrite Thunderbolt

Monitor Set Format 5.1

Assign every channel output to the Focusrite Thunderbolt

left = 1 Focusrite Thunderbolt

right = 2 Focusrite Thunderbolt

center = 3 Focusrite Thunderbolt

LFE = 4 Focusrite Thunderbolt

Ls = 5 Focusrite Thunderbolt

Rs = 6 Focusrite Thunderbolt

You will have to close and Re-Open Resolve -

Save Project and exit


Next go to >Fairlight>Bus Format

Choose Format 5.1

Click on OK


That should be it and can hear surround as expected:





















Next steps are not needed but good to know that these settings exist

Next choose the Fairlight tab at the

bottom of the application to enter the Fairlight mode

In the Fairlight mode click on Fairlight>Patch Input/Output

Resolve 17 frame grab change

>Patching Interface opens

On Source Choose Main Out

This is how the Patch Input/Output should look

Next select source channels L, R, C, Lfe, Ls, Rs in this order by clicking on the channels


Then on Destination click on channels 1-6 in order


They will have a white border around the boxes like this

Then click on Patch

Now you see the patches are correct

for 5.1 monitoring

close the window

Now play the timeline


you will see the 6 channels playing back

like this and hear the audio in the appropriate speakers