Page tree
Skip to end of metadata
Go to start of metadata

The Compact Flash cards necessary for recording with the KiPro Mini are located at the College of Communication Equipment Checkout at CMA 3.104.

Gently insert the compact flash card into the KiPro Mini. 2 slots are located on the side of the KiPro, and it does not matter which one you use. It should easily go 3/4 of the way into the KiPro.

Do not force it!

Make sure the KiPro mini is powered on.

How to Format the Compact Flash card for the KiPro Mini

To format a CF card, press the MEDIA button.

Using the SELECT up/down arrows, navigate to the MEDIA menu > Format Media.

Use the ADJUST up button to select FORMAT. Press the ADJUST up arrow button again. KiPro Mini will display "ERASE S1 [or S2]". Press and hold the ADJUST up arrow button for 2 seconds or longer and then formatting will begin.


Once the media finishes formatting, the KiPro Mini will display a completion confirmation.

Press stop to return to regular operation.

You can record in multiple formats of Apple ProRes using the KiPro Mini recorder.  Using the Select button, you can adjust the quality Apple ProRes that the KiPro mini uses, and the total amount of media that can be fit onto one card.

Apple ProRes

Data-rate Mb/sec

Data-rate GB/minute

Minutes per 64GB card



220 Mb

1.6 GB




145 Mb

1.06 GB



422 (LT)

100 Mb

0.73 GB


not considered full quality.

422 (Proxy)**

36 Mb

0.26 GB


for high-quality offline editing. Not an acceptable original.

*Apple ProRes is the same data-rate regardless of resolution.

ProRes datarate.xlsx

On your video monitor, select the output from the KiPro mini.  Ensure that the source you wish to record is coming through the KiPro mini to your record monitor.

In CMB 4.130 Studio 4F, select VTR 3 on the monitor selection panel above the KiPro Mini.
In BMC 3.208 Multimedia Newsroom, select the xxx.

To be sure you are looking at the video output from the KiPro Mini, look for the timecode readout. The KiPro Mini always displays a timecode readout.

When you are ready, push the red Record button below the display.

When recording, the green LED next to the CF card release button will begin blinking, showing that a recording is in process, and you’ll see the timecode changing on the display. The RECORD button is also backlit while recording.


When you are finished, push the STOP button.

While recording, the KiPro mini will display a percentage readout indicating how much recording space is left on the card.

To Record again, repeat the Record button / Stop button process.

This document discusses how to safely remove the compact flash card from the KiPro mini and obtain video off of the card.

The compact flash card is located on the side of the KiPro Mini.  Directly next to the card is the eject button for the compact flash card.  Firmly press the eject button to eject the card.

Take the 64GB card out of the KiPro mini.

Gently insert the card into the USB compact flash card reader.

Plug the USB card reader into the computer.

The compact flash card should show up on the Desktop of your computer.

Inside the card, under the Aja directory, find your video(s) that you wish to edit.

Select them and drag them to your Desktop, tempstorage, or your personal hard drive.

This will take some time to transfer your video.

After your video has completed copying off of the Compact Flash card, right click on the card, and Eject it, or drag it to the trash to safely eject the card.

When you are done recording, turn-off the KiPro mini before you eject the card.



Your video can now be edited or saved.