Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

To forward calls to voice mail when you don't answer the phone:

  1. To activate this feature:  From the dial tone, dial *84 28886 and wait for the confirmation tone, then hang up

...

  1. and proceed to next step:
  2. IMPORTANT:  The default number of rings callers hear before forwarding to voice mail is 9.  To change the number of rings:  (NOTE: You must perform the above step (*84 28886) for the following to have any effect.)  From the dial tone, dial *33 followed by any number of rings from 2 to 9, wait for the confirmation tone, then hang up.  For example, to set your phone to forward after 2 rings, dial *332.  NOTE: This is the number of rings the caller will hear; the number you hear on your set may vary depending on the type of set you have.  The ring cycle for callers is 6 seconds per ring.
  • To deactivate this feature:  From the dial tone, dial *85 and wait for the confirmation tone, then hang up.  NOTE:  If you reactivate this feature later, it will default back to 9 rings, so you may need to adjust the number of rings.

...