Page History

Connect the

lighting fixture to the lighting grid or find

the fixture on the grid that you want to turn on.

Locate where

the fixture is plugged in by following the cable up to the numbered square.

In this picture example, the

light fixture is plugged into circuit "

73"

Next we need to find the "Circuit" to turn on that matches "S1"

On the Strand Lighting Board,

Press F3 to get into the Setup menu

Press the "Right" arrow

to navigate to Menu #9


Press F3 to Select the "9. Console default"

Press F2 to confirm "Yes" and reset the defaults

Press F1 to "ESC" and get back to the home page

Press F3 for Setup

Choose "1. Patch"

Then press

F3 to select

Choose "1.

Edit Patch"

Then press F3 to select

Enter in the circuit to assign to the board.

Followed by the "@" / FX6 button

Then enter in the channel fader # to assign to the board.

EX:
To assign circuit 73 to the board channel fader 40 type in

"73@40" and follow that by pressing the asterisk key ( * )

Asterisk key

is the same as "enter"

to

confirm the dimmer assignment

Make sure Grand Master is also up

on the slider position

To see the settings of the circuits click the ESC or F1 key till the

"Main Menu" appears then click F3 or Setup to display the patch menu.
Arrow right to select the "2^nd"

setting then click Select or F3 to select the Display Patch menu.

The patch settings will appear per dimmer and by selecting the "right" arrow key

can scroll through all the dimmers and see what circuit is

patched to that controllable dimmer.
 

This example shows Circuit 44 and Circuit 80

are both controlled by

channel fader #44

on the Strand Dimmer Board