Page History

This WIKI will troubleshoot getting the Video and Audio Interface to display image on the monitor and audio through the speakers First Quit all applications and Shut down the computer
Disconnect the Thunderbolt cable that is going into the cable run under the desk. This connects to our Blackmagic Designs Input and Output box. We are power cycling the box by unplugging the cable.
Plug the cable back into the thunderbolt connection on the MacPro
Turn on the Mac Pro with the Power button
Next go to >Apple>System Prefs
Go to Blackmagic Design Desktop Video pref and double click it to open
Should see Ultra Studio 4K or Thunderbolt Shuttle Click on the Preference Icon shown here
Click on Video Output Scroll down to HDMI Output and change it 3D Output "Left Eye"	Image Added
Click on the Audio Tab Audio Input Make sure RCA is chosen Click on Save
Quit the Blackmagic Utility
Turn On TV
Open AVID to setup for AVID - (premiere further down in wiki)
There is a button on the timeline that sometimes gets turned off make sure the Hardware Active Button is on
Make sure your project is set to this UHD 23.976 Note troubleshooting tip is to set it to 1080 23.98 and then back to UHD Then back to this
To Setup Adobe Premiere for playback Choose "Premiere Pro CC > Preferences > Playback..."
Choose Blackmagic Playback Click OK
Click on Setup after you select the Blackmagic Playback
You may have to choose Scale up or Down for our non 4K monitor suites try both for the UltraStudio 4K	For the rooms with the Intensity Shuttle Thunderbolt choose scale down
Choose "Premiere Pro CC > Preferences > Audio Hardware..."
Make sure your Audio Hardware is set to Blackmagic Device (UltraStudio 4K or Blackmagic Audio)
If you get this error click Yes Then Click OK
Audio Monitoring make sure all the buttons shown here are pressed. Volume is adjusted but turning up the AUX Input Also turn up volume using the big main knob