Unplug the thunderbolt cable to Black Magic Design Thunderbolt Shuttle

RESTART THE COMPUTER

 Plug in the thunderbolt cable

Blackmagic Shuttle is connected via the Thunderbolt cable to the computer.

Make sure the Headphones are plugged into headphone jack on IMac

Use the TV Remote>

Turn on the Monitor and make sure you select the HDMI input

Or the suites that have the Sonys' use the power button and make sure it's set to A-1 Input.

Image Added

Make sure the Green cable is plugged

into the "Line Output" cable may not be

green just make sure the cable feeding

the Aux input on the PreSonus.

Go to the >

System Prefs>Sound>Output tab

Choose the LIne Out

Select the Aux Input and

Turn up the volume.

Launch ProTools

When ProTools opens click "Cancel" on the Quick Start Dialog. We do not want to open a session yet.


Need to set up the routing and Playback Engine first.

Go To Setup > Playback Engine

On the Playback Engine Drop Down choose Built-in Output



Click OK

Now go to Input and Output setup

Go to >Setup>I/O

Click "Defautl" on the I/O setup



Then Click OK

Now that the routing and hardware is set up open the ProTools session if you have one created already or make a new session.

Navigate to the session and open it or create a new session

To create a new Protools session

Type - Session

Name - (session name)

File Type - .WAV

Bit Depth: - 24 bit

Sample Rate: - 48kHz

I/O last used

Location - set to your hard drive NOT THE DESKTOP!!!!

Next Import the video into the project

Choose Import Video

Navigate to the video file that you want to view in the ProTools session

Choose to import at Session Start

Choose to enable the Video Engine

Click Yes here

If you would like to use the audio off the video file choose to save it to the default Audio Drive folder

Last step is to open up the Input and Output view in ProTools

Go to > View>Edit Window Views> I/O >

Choose the format 1080 or 720 23.98fps

Choose the Playback Quality - Note if there is stuttering choose Draft but Full should work

Make sure all the audio outputs are routed to the Built In Line Output 1-2 Stereo

Then you should see image on the TV and hear audio the speakers