IMPORTANT - Please read this first:

This page provides instructions for users of the new UT Voice Mail (UTVM) system, NOT SmartVoice.  If your building has not yet been converted to the new VoIP telephone system, then you are still using SmartVoice, and should consult the SmartVoice Voice Mail (Legacy) pages.  For information about the VoIP telephone system, including building deployment status, please visit the VoIP Project.

Getting Started with UT Voice Mail

UT’s new Voice Over IP (VoIP) phone system comes with its own integrated voice mail system, which has been re-branded “UT Voice Mail” (UTVM).  As phone service is transferred to the VoIP system, SmartVoice customers' mailboxes will be replaced with new UTVM mailboxes.  (In case you have saved messages in your SmartVoice mailbox, it will still be accessible for the foreseeable future, but note: messages expire in 30 days by default.) The information below will help you get started with basic login and setup tasks using your new UTVM mailbox.  Included are steps for popular customizations, help and support information and known issues.  This Wiki will continue to be updated as the phone system conversion progresses.  Please send your comments to utvoicemail@austin.utexas.edu.

Quick-Start VideoNOTE:  ITS has produced a step-by-step video demonstration of the following two start-up tasks on YouTube.  Caveat: It does not contain instructions for setting the number of rings (after forwarding calls when you don't answer; see Step 2 below).  We recommend that you right click the link to open it in a separate tab:  UTVM Setup Video

...