Versions Compared

Old Version 23

changes.mady.by.user James Cutrone

Saved on

compared with

New Version Current

changes.mady.by.user James Cutrone

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Added info about some room not supporting the ability to continue an arming sequence if a sensor is being triggered

...


1) First make sure all the room doors are closed and you are standing still in order to not trigger the motion sensor.

Step 2 image of keypad

2) Press the CMD button

Step 3 image of keypad

3) Press the button underneath the ARM text on the keypad screen.

Step 4 image of keypad

4) Enter your assigned numeric alarm system code

Step 5 image of keypad

5) After you enter your code, press the CMD button.


Step 5a image of keypadStep 5a image of keypad

5a) If after pressing the CMD button you see keypad screens similar to the ones pictured above, that means one or more of the room alarm sensors are being triggered. In this event, press the "OKAY" button to continue with the arming sequence. Alternatively, if you want to cancel the arming process you can press the "STOP" button (rightmost button). DO NOT choose the "BYPASS" option.

If after pressing the "OKAY" button you get a "No Authority" error message, then that means the room doesn't support the option to continue the arming sequence. In this event you'll need to try starting up the arming sequence again but this time make sure you are not triggering any of the alarm sensors. So make sure the room doors are closed and you are standing still when you attempt to arm up again.

Step 6 image of keypad

6) Wait for the countdown timer to begin and the red light on the left side of the keypad to turn on which indicates the arming sequence has begun.

7) Exit the room and make sure the room door is closed and locked.

...