Versions Compared

Old Version 10

changes.mady.by.user Mike Dow

Saved on

compared with

New Version 11

changes.mady.by.user Susanne U Kraft

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

We recommend the following large diaphragm condenser mics:

MicrophoneSetup

Neumann U87

Neumann TLM 103

Audio Technica 4050 or 4033

...

Image Removed
The side with the Mic's emblem is the side you speak into.

The basement of CMB has a low rumble to it starting at around 150Hz on down. The rumble is even present in the isolation booth.

Image Removed

Mount the microphone on the mic stand.

Plug XLR cable out of the mic...

.
..Plug the other end of the XLR into the wall jack.Snake 

Image RemovedImage Added

Attach the pop filter.

Make sure the setting on the front of the HD OMNI look like this

Image Removed

Launch ProTools.

Follow this wiki for ADR

Image Removed

As you slowly turn P1 up to a nice recording level, you may notice the VU meters moving even though there seems to be no sound. There IS sound, it is that 150Hz and lower rumble. You will need to either EQ this out while recording or in post.