Versions Compared

Old Version 4

changes.mady.by.user Susanne U Kraft

Saved on

compared with

New Version 5

changes.mady.by.user Susanne U Kraft

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Choose Audio I/F
Image Removed

Open Audio Midi setup


Zoom H4 how to connect via USB to computer menus

Turn on the Zoom H4

Image Added

Press the MENU button to access the Menus

Image Added

Click on Menu on the Side Scroll button

Image Removed

Select USB

Image Removed




Use the Scroll to Navigate through menus

PRESS the Wheel to choose the selection


Scroll to USB AND PRESS THE WHEEL to select it

Image Added

PRESS the wheel TO SELECT AUDIO I/O


Image Added

PRESS connect to connect to the computer 

Press the wheel to select
CONNECT

Image Added

Image Removed

Then Choose
Connect

Then plug in your type 1 older USB mini cable to the H4 and your computer

Image Added

Anchor
_GoBack_GoBack

On the Audio Devices should see the H4 Audio In and Out

(if not then check the H4 and make sure it is set to connect to computer via USB)

Image RemovedImage Added

Then go to ProTools Aggregate I/O




Check the boxes to "Use" H4 Audio IN and OUT

Open ProTools

Click OK to enable ProTools to record from ANY Hardware

Click OK on access to use the Microphone

Open or Create a session

Create a New Audio Track
>Track>New

Choose to create a Mono Track

On the track menu drop down shown here > Click it to show the I/O and check the box to show inputs and outputs on the track


On the Input interface choose
In 3 (Mono)

In 4 (Mono)

On the output make sure that is set to Built – In Output 1-2 Stereo

...