Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.

Turn on the 702T or the 744T



SELECT Click on Menu

Image RemovedImage Added

  1. Select 1) Quick Setup
  2. Click on Load Factory Settings>
  3. Then click the button next to the check mark to select

Then scroll down to item #3 and select Rec: Sample Rate

Change this setting to 48.048F

The next menu item to check is menu item #5 make sure it is set to .wav mono or poly depending on what you want the files to be recorded-Note the difference:---If recording double system audio that will be syncing in AVID OR FCP USE .wav poly

When choosing WAV mono (monophonic) as your file type the 7-Series will generate separate data files for each individual track recorded. The mono files generated by the 7-Series recorders have file names similar to T01_1.WAV and T01_2.WAV. The _1 and _2 after the take numbers are the mono designators added to the file name. These represent individual tracks.
When choosing WAV poly (polyphonic) as your file type the 7-Series will generate one data file containing multiple tracks. The poly files generated by the 7-Series have file names similar to T01.WAV, no matter how many tracks are contained within the file.

Scroll down to menu item #47 and change the Time Code Mode to Record Run

This final screen is how the 702T or 744T should be set up

24bit 48048F
sample rate .WAV is the file type

Timecode 30ND the timecode doesn't matter because the sample rate is what changes the audio to match the film rate

See Page 3 for additional menu settings: