No audio on Teaching Station microphones or speakers are off???
You have AMPs off most likely
Go to the room where tech staff stores the
Lectern in the back hallway to the left of the DMC 3.206 Screen in the Amp closet
Locate Circuit B - labeled on the RACK RAILS on front side of RACK
Locate Circuit D - labeled on the RACK RAILS on front side of RACK
GO BEHIND THE RACK AFTER LOCATING B AND D POWER CIRCUTS
WE WILL access THE CONTROLS FOR THESE CIRCUITS on the back
Make sure the switch is set to LOCAL
Then press the "Local Sequence Initiate"
PRESS for a second or so really press the button!
The power should restore on the Amps that are off. May take about 5-10 seconds
NOTE Amps that are on will stay on