You have a nice booth, a nice mic, and nice software...so why is there noise? Because you're right next to Guadalupe, a very busy street and down the hall from some very big and loud HVAC building equipment. Fortunately, the tools to fix this are available. |
|
| Select your audio segment by double clicking with the region selector. The segment should turn dark like this. |
|
| Next go to the AudioSuite menu, choose, Noise Reduction, then choose iZotope RX 4 Connect | x |
| Click Send |
|
| RX4 Advanced will open with your audio segment loaded into it |
|
| Choose this tool, so you can draw a box around the problem area |
|
| Select the Low Rumble without selecting the audio you want |
|
| Choose Denoise |
|
| Click Learn |
|
| Double click the waveform behind the Denoise dialog box, it should turn a milky white so that you can apply this learned noise reduction to the whole segment. |
|
| Click Process back in the Denoise dialog box |
|
Click Process again Close the Denoise Dialog box |
|
Click "Send Back" |
 |
| Click RENDER |
|
| You will not only hear a difference, you should also see one too | Before After |
Overview
Content Tools
