The "evertz" is a sync generator that needs to be turned on |
|
| Turn on the power switch for the "evertz" unit |
|
Turn on the power for the DigiBeta Video Tape Machine |
|
| On the Patch Panel on the rack patch DIGIBETA - HD-SDI OUT to |
|
| TERRANEX - SDI IN |
|
Put the tape in the deck |
|
Turn on the Teranex - It'll take a bit to turn on, |
|
Go to >Apple>System Prefs > |
|
| Choose the ALL settings icon to see all the settings |
|
| Choose Blackmagic Design Desktop Video |
|
| Click on Teranex settings icon shown here |
|
Video Input - Change Input to SDI Click SAVE |
|
Audio Input - Embedded Click SAVE |
|
Open Blackmagic Media Express |
|
Go to >Media Express> |
|
Set the Video Format to |
|
| Put the tape in the deck and hit Play |
|
Click on the Log and Capture Tab in Media Express Wait about 5 or so seconds |
|
You should see image and audio levels Then click on the "Capture" Button to start capturing. Capture Button will turn RED |
|
| Capture Button will turn RED |
|
| Click Capture to stop capturing |
|
| Turn off the Teranex when finished |
|
| TURN OFF THE DigiBeta Deck WHEN FINISHED |
|
| Turn off the "Evertz" |
|
| Close and tighten the screws on the "evertz" door panel to hold it closed |
|
Overview
Content Tools
