Do not do this unless you have locked up the switcher.
Do these steps:
Ross reset
Menu>Reset>Next>Factory Reset>Push the button>Confirm>
Go into the production control room behind the CMB Proctor desk Find the Ross Crossover Switcher Press in towards the middle of the rack the two black tabs to open the fron |
|
Turn off the power button here. Wait about 3 minutes and turn on Then it'll take about 5 or more minutes to boot up |
|
Then you will have to do the Studio 4A – Ross Switcher – Audio N – Pass Setup | Ross Crossover Switcher - N Pass setup |
| You then need to set the switcher to External Sync | Ross Crossover Switcher - How to set to External Sync |
| Need to check the Crosspoint Routing and Shift Crosspoint Routing | Ross Crossover Switcher - How to Check and Set the Crosspoints and Set Correctly |
| Then you must set the Alpha channel for the CG up again. | Ross - Crossover Switcher - How to fix the Character Generator or Ross XPressions Alpha Chanel |
| You must also set the Chroma Key channel again. | Ross - Crossover Switcher - Chroma Key settings |
| Set the Frame Sync for the Remote Camera | Ross Crossover Switcher - How to Fix a Sync Line in Remote Camera Input or Frame Sync the Input |
| How to set the key and dissolve transitions | Ross - Crossover Switcher - How to set the Key Transition Durations Cuts |
