After raw sequence files are generated (in FASTQ format), quality-checked, and pre-processed in some way, the next step in most NGS pipelines is mapping to a reference genome.
For individual sequences, it is common to use a tool like BLAST to identify genes or species of origin. However, a normal NGS dataset will have tens to hundreds of millions of sequences, which BLAST and similar tools are not designed to handle. Thus, a large set of computational tools have been developed to quickly, align each read to its best location, if any, in a reference.
Even though many mapping tools exist, a few individual programs have a dominant "market share" of the NGS world. In this section, we will primarily focus on two of the most versatile mappers: BWA and Bowtie2, the latter being part of the Tuxedo suite which includes the transcriptome-aware RNA-seq aligner Tophat2 as well as other downstream quantifiaction tools.
This should be second nature by now
First stage the sample datasets and references we will use.
mkdir -p $SCRATCH/core_ngs/alignment/fastq mkdir -p $SCRATCH/core_ngs/references/fasta cp $CORENGS/alignment/*fastq.gz $SCRATCH/core_ngs/alignment/fastq/ cp $CORENGS/references/*.* $SCRATCH/core_ngs/references/fasta/
These are descriptions of the files we copied:
|Sample_Yeast_L005_R1.cat.fastq.gz||Paired-end Illumina, First of pair, FASTQ||Yeast ChIP-seq|
|Sample_Yeast_L005_R2.cat.fastq.gz||Paired-end Illumina, Second of pair, FASTQ||Yeast ChIP-seq|
|human_rnaseq.fastq.gz||Paired-end Illumina, First of pair only, FASTQ||Human RNA-seq|
|human_mirnaseq.fastq.gz||Single-end Illumina, FASTQ||Human microRNA-seq|
|cholera_rnaseq.fastq.gz||Single-end Illumina, FASTQ||V. cholerae RNA-seq|
Before we get to alignment, we need a reference to align to. This is usually an organism's genome, but can also be any set of names sequences, such as a transcriptome or other set of genes.
Here are the four reference genomes we will be using today, with some information about them. These are not necessarily the most recent versions of these references (e.g. the newest human reference genome is hg38 and the most recent miRBase annotation is v21. (See here for information about many more genomes.)
|Reference||Species||Base Length||Contig Number||Source||Download|
|hg19||Human||3.1 Gbp||25 (really 93)||UCSC||UCSC GoldenPath|
|sacCer3||Yeast||12.2 Mbp||17||UCSC||UCSC GoldenPath|
|mirbase v20||Human subset||160 Kbp||1908||miRBase||miRBase Downloads|
|vibCho (O395)||Vibrio cholerae||~4 Mbp||2||GenBank||GenBank Downloads|
Searching genomes is computationally hard work and takes a long time if done on un-indexed, linear genomic sequence. So aligners require that references first be indexed to accelerate lookup. The aligners we are using each require a different index, but use the same method (the Burrows-Wheeler Transform) to get the job done.
Building a reference index involves taking a FASTA file as input, with each chromosome (or contig) as a separate FASTA entry, and producing an aligner-specific set of files as output. Those output index files are then used to perform the sequence alignment, and alignments are reported using coordinates referencing names and offset positions based on the original FASTA file contig entries.
We can index the references for the yeast genome, the human miRNAs, and the V. cholerae genome, because they are all small, so we'll grab the FASTA files for yeast and human miRNAs references and build each index right before we use them. We will also obtain the special GenBank file that contains both the V. cholerae genome sequence and annotations (a .gbk file). These FASTA files, which you staged above, are:
/work/projects/BioITeam/projects/courses/Core_NGS_Tools/references/sacCer3.fa /work/projects/BioITeam/projects/courses/Core_NGS_Tools/references/hairpin_cDNA_hsa.fa /work/projects/BioITeam/projects/courses/Core_NGS_Tools/references/vibCho.O395.gbk
hg19 is way too big for us to index here so we will use an existing set of BWA hg19 index files located at:
The BioITeam maintains a set of reference indexes for many common organisms and aligners. They can be found in aligner-specific sub-directories of the /work/projects/BioITeam/ref_genome area. E.g.:
We will perform a global alignment of the paired-end Yeast ChIP-seq sequences using bwa. This workflow has the following steps:
We're going to skip the trimming step for now and see how it goes. We'll perform steps 2 - 5 now and leave samtools for the next exercise since steps 6 - 10 are common to nearly all post-alignment workflows.
Like other tools you've worked with so far, you first need to load bwa using the module system. Do that now, and then enter bwa with no arguments to view the top-level help page (many NGS tools will provide some help when called with no arguments).
module load bwa bwa
Program: bwa (alignment via Burrows-Wheeler transformation) Version: 0.7.12-r1039 Contact: Heng Li <firstname.lastname@example.org> Usage: bwa <command> [options] Command: index index sequences in the FASTA format mem BWA-MEM algorithm fastmap identify super-maximal exact matches pemerge merge overlapping paired ends (EXPERIMENTAL) aln gapped/ungapped alignment samse generate alignment (single ended) sampe generate alignment (paired ended) bwasw BWA-SW for long queries shm manage indices in shared memory fa2pac convert FASTA to PAC format pac2bwt generate BWT from PAC pac2bwtgen alternative algorithm for generating BWT bwtupdate update .bwt to the new format bwt2sa generate SA from BWT and Occ Note: To use BWA, you need to first index the genome with `bwa index'. There are three alignment algorithms in BWA: `mem', `bwasw', and `aln/samse/sampe'. If you are not sure which to use, try `bwa mem' first. Please `man ./bwa.1' for the manual.
As you can see, bwa include many sub-commands that perform the tasks we are interested in.
We will index the genome with the bwa index command. Type bwa index with no arguments to see usage for this sub-command.
Usage: bwa index [-a bwtsw|is] [-c] <in.fasta> Options: -a STR BWT construction algorithm: bwtsw or is [auto] -p STR prefix of the index [same as fasta name] -b INT block size for the bwtsw algorithm (effective with -a bwtsw)  -6 index files named as <in.fasta>.64.* instead of <in.fasta>.* Warning: `-a bwtsw' does not work for short genomes, while `-a is' and `-a div' do not work not for long genomes. Please choose `-a' according to the length of the genome.
Based on the usage description, we only need to specify two things:
Since sacCer3 is relative large (~12 Mbp) we will specify bwtsw as the indexing option (as indicated by the "Warning" message), and the name of the FASTA file is sacCer3.fa.
Importantly, the output of this command is a group of files that are all required together as the index. So, within our references directory, we will create another directory called references/bwa/sacCer3 and build the index there. To remind ourselves which FASTA was used to build the index, we create a symbolic link to our references/fasta/sacCer3.fa file (note the use of the ../.. relative path syntax).
mkdir -p $SCRATCH/core_ngs/references/bwa/sacCer3 cd $SCRATCH/core_ngs/references/bwa/sacCer3 ln -s ../../fasta/sacCer3.fa ls -l
Now execute the bwa index command.
bwa index -a bwtsw sacCer3.fa
Since the yeast genome is not large when compared to human, this should not take long to execute (otherwise we would do it as a batch job). When it is complete you should see a set of index files like this:
sacCer3.fa sacCer3.fa.amb sacCer3.fa.ann sacCer3.fa.bwt sacCer3.fa.pac sacCer3.fa.sa
It is often useful to know what chromosomes/contigs are in a FASTA file before you start an alignment so that you're familiar with the contig naming convention – and to verify that it's the one you expect. For example, chromosome 1 is specified differently in different references and organisms: chr1 (USCS human), chrI (UCSC yeast), or just 1 (Ensembl human GRCh37).
A FASTA file consists of a number of contig name entries, each one starting with a right carat ( > ) character, followed by many lines of base characters. E.g.:
>chrI CCACACCACACCCACACACCCACACACCACACCACACACCACACCACACC CACACACACACATCCTAACACTACCCTAACACAGCCCTAATCTAACCCTG GCCAACCTGTCTCTCAACTTACCCTCCATTACCCTGCCTCCACTCGTTAC CCTGTCCCATTCAACCATACCACTCCGAACCACCATCCATCCCTCTACTT
How do we dig out just the lines that have the contig names and ignore all the sequences? Well, the contig name lines all follow the pattern above, and since the > character is not a valid base, it will never appear on a sequence line.
We've discovered a pattern (also known as a regular expression) to use in searching, and the command line tool that does regular expression matching is grep (general regular expression parser). Read more about grep here: Advanced commands: grep.
Regular expressions are so powerful that nearly every modern computer language includes a "regex" module of some sort. There are many online tutorials for regular expressions, and several slightly different "flavors" of them. But the most common is the Perl style (http://perldoc.perl.org/perlretut.html), which was one of the fist and still the most powerful (there's a reason Perl Perl used extensively when assembling the human genome). We're only going to use the most simple of regular expressions here, but learning more about them will pay handsome dividends for you in the future.
Here's how to execute grep to list contig names in a FASTA file.
grep -P '^>' sacCer3.fa | more
'^>' is the regular expression describing the pattern we're looking for (described below)
Now down to the nuts and bolts of the pattern: '^>'
First, the single quotes around the pattern – this tells the bash shell to pass the exact string contents to grep.
As part of its friendly command line parsing and evaluation, the shell will often look for special characters on the command line that mean something to it (for example, the $ in front of an environment variable name, like in $SCRATCH). Well, regular expressions treat the $ specially too – but in a completely different way! Those single quotes tell the shell "don't look inside here for special characters – treat this as a literal string and pass it to the program". The shell will obey, will strip the single quotes off the string, and will pass the actual pattern, ^>, to the grep program. (Note that the shell does look inside double quotes ( " ) for certain special signals, such as looking for environment variable names to evaluate. Read more about Quoting in the shell.)
So what does ^> mean to grep? We know that contig name lines always start with a > character, so > is a literal for grep to use in its pattern match.
We might be able to get away with just using this literal alone as our regex, specifying '>' as the command line argument. But for grep, the more specific the pattern, the better. So we constrain where the > can appear on the line. The special carat ( ^ ) character represents "beginning of line". So ^> means "beginning of a line followed by a > character".
Exercise: How many contigs are there in the sacCer3 reference?
Or use grep's -c option that says "just count the line matches"
There are 17 contigs.
Now, we're ready to execute the actual alignment, with the goal of initially producing a SAM file from the input FASTQ files and reference. First prepare a directory for this exercise and link the sacCer3 reference directories there (this will make our commands more readable).
mkdir -p $SCRATCH/core_ngs/alignment/yeast_bwa cd $SCRATCH/core_ngs/alignment/yeast_bwa ln -s -f ../fastq ln -s -f ../../references/bwa/sacCer3
As our workflow indicated, we first use bwa aln on the R1 and R2 FASTQs, producing a BWA-specific .sai intermediate binary files.
What does bwa aln needs in the way of arguments?
There are lots of options, but here is a summary of the most important ones.
|-l||Specifies the length of the seed (default = 32)|
|-k||Specifies the number of mismatches allowable in the seed of each alignment (default = 2)|
|-n||Specifies the number of mismatches (or fraction of bases in a given alignment that can be mismatches) in the entire alignment (including the seed) (default = 0.04)|
|-t||Specifies the number of threads|
Other options control the details of how much a mismatch or gap is penalized, limits on the number of acceptable hits per read, and so on. Much more information can be found on the BWA manual page.
For a basic alignment like this, we can just go with the default alignment parameters.
Also note that bwa writes its (binary) output to standard output by default, so we need to redirect that to a .sai file.
We will execute these commands directly (not in a batch job), but since they are fairly large files we will first set up an interactive development (idev) session, which will give us a compute node for 3 hours:
idev -p normal -m 180 -N 1 -n 24 -A UT-2015-05-18 --reservation=CCBB
You can tell you're in a idev session because the hostname command will return a compute node name (e.g. nid00438) instead of a login node name (e.g. login5).
For simplicity, we will just execute these commands directly, one at a time. Each command should only take few minutes and you will see bwa's progress messages in your terminal.
module load bwa cd $SCRATCH/core_ngs/alignment/yeast_bwa bwa aln sacCer3/sacCer3.fa fastq/Sample_Yeast_L005_R1.cat.fastq.gz > yeast_R1.sai bwa aln sacCer3/sacCer3.fa fastq/Sample_Yeast_L005_R2.cat.fastq.gz > yeast_R2.sai
When all is done you should have two .sai files: yeast_R1.sai and yeast_R2.sai. Double check that output was written by doing ls -lh and making sure the file sizes listed are not 0.
Exercise: How long did it take to align the R2 file?
The last few lines of bwa's execution output should look something like this:
So the R2 alignment took just under 4 minutes.
Since you have your own private compute node, you can use all its resources. It has 24 cores, so re-run the R2 alignment asking for 20 execution threads.
bwa aln -t 20 sacCer3/sacCer3.fa fastq/Sample_Yeast_L005_R2.cat.fastq.gz > yeast_R2.sai
Exercise: How much of a speedup did you seen when aligning the R2 file with 20 threads?
The last few lines of bwa's execution output should look something like this:
So the R2 alignment took only 21 seconds, or about 10 times as fast as with only one processing thread.
Next we use the bwa sampe command to pair the reads and output SAM format data. Just type that command in with no arguments to see its usage.
For this command you provide the same reference index prefix as for bwa aln, along with the two .sai files and the two original FASTQ files. Also, bwa writes its output to standard output, so redirect that to a .sam file.
Here is the command line statement you need. Just execute it on the command line.
bwa sampe sacCer3/sacCer3.fa yeast_R1.sai yeast_R2.sai fastq/Sample_Yeast_L005_R1.cat.fastq.gz fastq/Sample_Yeast_L005_R2.cat.fastq.gz > yeast_pairedend.sam
You should now have a SAM file (yeast_pairedend.sam) that contains the alignments. It's just a text file, so take a look with head, more, less, tail, or whatever you feel like. In the next section, with samtools, you'll learn some additional ways to analyze the data once you create a BAM file.
Exercise: What kind of information is in the first lines of the SAM file?
|The SAM file has a number of header lines, which all start with an at sign ( @ ). The @SQ lines describe each contig and its length. There is also a @PG line that describes the way the bwa sampe was performed.|
Exercise: How many alignment records (not header records) are in the SAM file?
This looks for the pattern '^HWI' which is the start of every read name (which starts every alignment record).
Or use the -v (invert) option to tell grep to print all lines that don't match a particular pattern; here, all the header lines that start with @.
|There are 1,184,360 alignment records.|
Exercise: How many sequences were in the R1 and R2 FASTQ files combined?
|There were a total of 1,184,360 original sequences|
Both R1 and R2 reads must have separate alignment records, because there were 1,184,360 R1+R2 reads and the same number of alignment records.
The SAM file must contain both mapped and un-mapped reads, because there were 1,184,360 R1+R2 reads and the same number of alignment records.
Alignment records occur in the same read-name order as they did in the FASTQ, except that they come in pairs. The R1 read comes 1st, then the corresponding R2. This is called read name ordering.
Recall the format of a SAM alignment record:
Suppose you wanted to look only at field 3 (contig name) values in the SAM file. You can do this with the handy cut command. Below is a simple example where you're asking cut to display the 3rd column value for the last 10 alignment records.
tail yeast_pairedend.sam | cut -f 3
By default cut assumes the field delimiter is Tab, which is the delimiter used in the majority of NGS file formats. You can specify a different delimiter with the -d option.
You can also specify a range of fields, and mix adjacent and non-adjacent fields. This displays fields 2 through 6, field 9:
tail -20 yeast_pairedend.sam | cut -f 2-6,9
You may have noticed that some alignment records contain contig names (e.g. chrV) in field 3 while others contain an asterisk ( * ). Usually the * means the record didn't map. (This isn't always true – later you'll see how to properly distinguish between mapped and unmapped reads using samtools.) We're going to use this heuristic along with cut to see about how many records represent aligned sequences.
First we need to make sure that we don't look at fields in the SAM header lines. We're going to end up with a series of pipe operations, and the best way to make sure you're on track is to enter them one at a time piping to head:
# the ^HWI pattern matches lines starting with HWI (the start of all read names in column 1) grep -P '^HWI' yeast_pairedend.sam | head
Ok, it looks like we're seeing only alignment records. Now let's pull out only field 3 using cut:
grep -P '^HWI' yeast_pairedend.sam | cut -f 3 | head
Cool, we're only seeing the contig name info now. Next we use grep again, piping it our contig info and using the -v (invert) switch to say print lines that don't match the pattern:
grep -P '^HWI' yeast_pairedend.sam | cut -f 3 | grep -v '*' | head
Perfect! We're only seeing real contig names that (usually) represent aligned reads. Let's count them by piping to wc -l (and omitting omit head of course – we want to count everything).
grep -P '^HWI' yeast_pairedend.sam | cut -f 3 | grep -v '*' | wc -l
Exercise: About how many records represent aligned sequences? What alignment rate does this represent?
The expression above returns 612,968. There were 1,184,360 records total, so the percentage is:
or about 51%. Not great.
Exercise: What might we try in order to improve the alignment rate?
|Recall that these are 100 bp reads and we did not remove adapter contamination. There will be a distribution of fragment sizes – some will be short – and those short fragments may not align without adapter removal (e.g. with fastx_trimmer).|
The SAMtools program is a commonly used set of tools that allow a user to manipulate SAM/BAM files in many different ways, ranging from simple tasks (like SAM/BAM format conversion) to more complex functions (like sorting, indexing and statistics gathering). It is available in the TACC module system in the typical fashion. Load that module and see what samtools has to offer:
module load samtools samtools
Program: samtools (Tools for alignments in the SAM format) Version: 1.3.1 (using htslib 1.3.1) Usage: samtools <command> [options] Commands: -- Indexing dict create a sequence dictionary file faidx index/extract FASTA index index alignment -- Editing calmd recalculate MD/NM tags and '=' bases fixmate fix mate information reheader replace BAM header rmdup remove PCR duplicates targetcut cut fosmid regions (for fosmid pool only) addreplacerg adds or replaces RG tags -- File operations collate shuffle and group alignments by name cat concatenate BAMs merge merge sorted alignments mpileup multi-way pileup sort sort alignment file split splits a file by read group quickcheck quickly check if SAM/BAM/CRAM file appears intact fastq converts a BAM to a FASTQ fasta converts a BAM to a FASTA -- Statistics bedcov read depth per BED region depth compute the depth flagstat simple stats idxstats BAM index stats phase phase heterozygotes stats generate stats (former bamcheck) -- Viewing flags explain BAM flags tview text alignment viewer view SAM<->BAM<->CRAM conversion depad convert padded BAM to unpadded BAM
In this exercise, we will use five utilities provided by samtools: view, sort, index, flagstat, and idxstats. Each of these is executed in one line for a given SAM/BAM file. In the SAMtools/BEDtools sections tomorrow we will explore samtools in more in depth.
There are two main "eras" of SAMtools development:
Unfortunately, some functions with the same name in both version eras have different options and arguments! So be sure you know which version you're using. (The samtools version is usually reported at the top of its usage listing).
The default version in the ls5 module system is 1.3.1, but the BioITeam has a copy of the version 0.1.19 samtools for programs that might need it: /work/projects/BioITeam/ls5/bin/samtools-0.1.19.
The samtools view utility provides a way of converting between SAM (text) and BAM (binary, compressed) format. It also provides many, many other functions which we will discuss lster. To get a preview, execute samtools view without any other arguments. You should see:
Usage: samtools view [options] <in.bam>|<in.sam>|<in.cram> [region ...] Options: -b output BAM -C output CRAM (requires -T) -1 use fast BAM compression (implies -b) -u uncompressed BAM output (implies -b) -h include header in SAM output -H print SAM header only (no alignments) -c print only the count of matching records -o FILE output file name [stdout] -U FILE output reads not selected by filters to FILE [null] -t FILE FILE listing reference names and lengths (see long help) [null] -L FILE only include reads overlapping this BED FILE [null] -r STR only include reads in read group STR [null] -R FILE only include reads with read group listed in FILE [null] -q INT only include reads with mapping quality >= INT  -l STR only include reads in library STR [null] -m INT only include reads with number of CIGAR operations consuming query sequence >= INT  -f INT only include reads with all bits set in INT set in FLAG  -F INT only include reads with none of the bits set in INT set in FLAG  -x STR read tag to strip (repeatable) [null] -B collapse the backward CIGAR operation -s FLOAT integer part sets seed of random number generator ; rest sets fraction of templates to subsample [no subsampling] -@, --threads INT number of BAM/CRAM compression threads  -? print long help, including note about region specification -S ignored (input format is auto-detected) --input-fmt-option OPT[=VAL] Specify a single input file format option in the form of OPTION or OPTION=VALUE -O, --output-fmt FORMAT[,OPT[=VAL]]... Specify output format (SAM, BAM, CRAM) --output-fmt-option OPT[=VAL] Specify a single output file format option in the form of OPTION or OPTION=VALUE -T, --reference FILE Reference sequence FASTA FILE [null]
That is a lot to process! For now, we just want to read in a SAM file and output a BAM file. The input format is auto-detected, so we don't need to specify it (although you do in v0.1.19). We just need to tell the tool to output the file in BAM format.
cd $SCRATCH/core_ngs/alignment/yeast_bwa samtools view -b -o yeast_pairedend.bam yeast_pairedend.sam
How do you look at the BAM file contents now? That's simple. Just use samtools view without the -b option. Remember to pipe output to a pager!
samtools view yeast_pairedend.bam | more
Notice that this does not show us the header record we saw at the start of the SAM file.
Exercise: What samtools view option will include the header records in its output? Which option would show only the header records?
samtools view -h shows header records along with alignment records.
samtools view -H shows header records only.
Looking at some of the alignment record information (e.g. samtools view yeast_pairedend.bam | cut -f 1-4 | more), you will notice that read names appear in adjacent pairs (for the R1 and R2), and the mappings are in no particular order, with chromosomes and start positions all mixed up. This makes searching through the file very inefficient. samtools sort provides the ability to re-order entries in the SAM file either by coordinate position or by read name.
If you execute samtools sort without any options, you see its help page:
Usage: samtools sort [options...] [in.bam] Options: -l INT Set compression level, from 0 (uncompressed) to 9 (best) -m INT Set maximum memory per thread; suffix K/M/G recognized [768M] -n Sort by read name -o FILE Write final output to FILE rather than standard output -T PREFIX Write temporary files to PREFIX.nnnn.bam -@, --threads INT Set number of sorting and compression threads  --input-fmt-option OPT[=VAL] Specify a single input file format option in the form of OPTION or OPTION=VALUE -O, --output-fmt FORMAT[,OPT[=VAL]]... Specify output format (SAM, BAM, CRAM) --output-fmt-option OPT[=VAL] Specify a single output file format option in the form of OPTION or OPTION=VALUE --reference FILE Reference sequence FASTA FILE [null
In most cases you will be sorting a BAM file from name order to coordinate order. You can use either -o or reidrection with > to control the output.
To sort the paired-end yeast BAM file by coordinate, and get a BAM file named yeast_pairedend.sort.bam as output, execute the following command:
cd $SCRATCH/core_ngs/alignment/yeast_bwa samtools sort -O bam -T yeast_pairedend.tmp yeast_pairedend.bam > yeast_pairedend.sort.bam
Exercise: Compare the file sizes of the yeast_pariedend .sam, .bam, and .sort.bam files and explain why they are different.
The yeast_pairedend.sam text file is the largest at ~348 MB.
The name-ordered binary yeast_pairedend.bam text file only about 1/3 that size, ~110 MB. They contain exactly the same records, in the same order, but conversion from text to binary results in a much smaller file.
The coordinate-ordered binary yeast_pairedend.sort.bam file is even slightly smaller, ~91 MB. This is because BAM files are actually customized gzip-format files. The customization allows blocks of data (e.g. all alignment records for a contig) to be represented in an even more compact form. You can read more about this in section 4 of the SAM format specification.
Many tools (like the UCSC Genome Browser) only need to use portions of a BAM file at a given point in time. For example, if you are viewing alignments that are within a particular gene, alignment records on other chromosomes do not need to be loaded. In order to speed up access, BAM files are indexed, producing BAI files which allow fast random access. This is especially important when you have many alignment records.
The utility samtools index creates an index that has the same name as the input BAM file, with suffix .bai appended. Here's the samtools index usage:
Usage: samtools index [-bc] [-m INT] <in.bam> [out.index] Options: -b Generate BAI-format index for BAM files [default] -c Generate CSI-format index for BAM files -m INT Set minimum interval size for CSI indices to 2^INT 
The syntax here is way, way easier. We want a BAI-format index which is the default. (CSI-format is used with extremely long contigs, which don't apply here - the most common use case is for polyploid plant genomes).
So all we have to type is:
samtools index yeast_pairedend.sort.bam
This will produce a file named yeast_pairedend.bam.bai.
Most of the time when an index is required, it will be automatically located as long as it is in the same directory as its BAM file and shares the same name up until the .bai extension.
Exercise: Compare the sizes of the sorted BAM file and its BAI index.
While the yeast_pairedend.sort.bam text file is ~91 MB, its index (yeast_pairedend.sort.bai) is only 20 KB.
Since the BAM file contains records for both mapped and unmapped reads, just counting records doesn't provide information about the mapping rate of our alignment. The samtools flagstat tool provides a simple analysis of mapping rate based on the the SAM flag fields. Here's how to run samtools flagstat and both see the output in the terminal and save it in a file – the samtools flagstat standard output is piped to tee, which both writes it to the specified file and sends it to its standard output:
samtools flagstat yeast_pairedend.sort.bam | tee yeast_pariedend.flagstat.txt
You should see something like this:
1184360 + 0 in total (QC-passed reads + QC-failed reads) 0 + 0 secondary 0 + 0 supplementary 0 + 0 duplicates 547664 + 0 mapped (46.24%:-nan%) 1184360 + 0 paired in sequencing 592180 + 0 read1 592180 + 0 read2 473114 + 0 properly paired (39.95%:-nan%) 482360 + 0 with itself and mate mapped 65304 + 0 singletons (5.51%:-nan%) 534 + 0 with mate mapped to a different chr 227 + 0 with mate mapped to a different chr (mapQ>=5)
Ignore the "+ 0" addition to each line - that is a carry-over convention for counting QA-failed reads that is no longer relevant.
The most important statistic is the mapping rate (here 46%) but this readout also allows you to verify that some common expectations (e.g. that about the same number of R1 and R2 reads aligned, and that most mapped reads are proper pairs) are met.
Exercise: What proportion of mapped reads were properly paired?
Divide the number of properly paired reads by the number of mapped reads:
About 86% of mapped read were properly paired. This is actually a bit on the low side for ChIP-seq alignments which typically over 90%.
Now that we have a sorted, indexed BAM file, we might like to get some simple statistics about the alignment run. For example, we might like to know how many reads aligned to each chromosome/contig. The samtools idxstats is a very simple tool that provides this information. If you type the command without any arguments, you will see that it could not be simpler - just type the following command:
samtools idxstats yeast_pairedend.sort.bam
The output is a text file with four tab-delimited columns with the following meanings:
The reason that the "unmapped reads" field for the named chromosomes is not zero is that, if one half of a pair of reads aligns while the other half does not, the unmapped read is still assigned to the chromosome its mate mapped to, but is flagged as unmapped.
If you're mapping to a non-genomic reference such as miRBase miRNAs or another set of genes (a transcriptome), samtools idxstats gives you a quick look at quantitative alignment results.
Now that you've done everything the hard way, let's see how to do run an alignment pipeline using a BWA alignment script.
First the setup:
mkdir -p $SCRATCH/core_ngs/align2/fastq cd $SCRATCH/core_ngs/align2/fastq cp /corral-repl/utexas/BioITeam/core_ngs_tools/alignment/*fastq.gz .
Before executing the script you need to have one environment variable set. We'll do it at the command line here, but you could put it in your .bashrc file.
Now change into the directory and call the script with no arguments to see usage
cd $SCRATCH/core_ngs/align2 $path_code/script/align/align_bwa_illumina.sh
There are lots of bells and whistles in the arguments, but the most important are the first few:
Now run the pipeline. By piping the output to tee <filename> we can see the script's progress at the terminal, and it also is written to <filename>.
$path_code/script/align/align_bwa_illumina.sh ./fastq/Sample_Yeast_L005_R1.cat.fastq.gz yeast_chip sacCer3 1 2>&1 | tee aln.yeast_chip.log
This alignment pipeline script performs the following steps:
There are a number of output files, with the most important being those desribed below.
The alignment log will have a "I ran successfully" message at the end if all went well, and if there was an error, the important information should also be at the end of the log file. So you can use tail to check the status of an alignment; for example:
This will show something like:
..samstats file 'yeast_chip.samstats.txt' exists Thu May 28 16:36:01 CDT 2015 ..samstats file file 'yeast_chip.samstats.txt' size ok Thu May 28 16:36:01 CDT 2015 --------------------------------------------------------- Cleaning up files... --------------------------------------------------------- ckRes 0 cleanup --------------------------------------------------------- All bwa alignment tasks completed successfully! Thu May 28 16:36:01 CDT 2015 ---------------------------------------------------------
Notice that success message: "All bwa alignment tasks completed successfully!". It should only appear once in any successful alignment log.
When multiple alignment commands are run in parallel it is important to check them all, and you can use grep looking for part of the unique success message to do this.
For example, suppose I have run 6 alignments and have these 6 log files:
aln.delswr1_htz1_tap1t0.log aln.delswr1_htz1_tap1t30.log aln.wt_htz1_tap1t15.log aln.delswr1_htz1_tap1t15.log aln.wt_htz1_tap1t0.log aln.wt_htz1_tap1t30.log
I can check that all 6 completed with this command:
grep 'completed successfully' aln.*.log | wc -l
If this command returns 6, I'm done. But what if it doesn't? If you grep -v (lines that don't contain the pattern), you'll get every line in every log file except the success message line, which is not what you want at all.
You could tail the log files one by one to see which one(s) don't have the message, but you can also use a special grep option to do this work:
grep -L 'completed successfully' aln.*.log
The -L option tells grep to only print the filenames that don't contain the pattern. Perfect!
The <prefix>.samstats.txt statistics file produced by the alignment pipeline has a lot of good information in one place. If you use cat or more to view it you'll see this:
----------------------------------------------- Aligner: bwa Total sequences: 1184360 Total mapped: 547664 (46.2 %) Total unmapped: 636696 (53.8 %) Primary: 547664 (100.0 %) Secondary: Duplicates: 324280 (59.2 %) Fwd strand: 272898 (49.8 %) Rev strand: 274766 (50.2 %) Multi hit: 18688 (3.4 %) Soft clip: 222451 (40.6 %) All match: 319429 (58.3 %) Indels: 6697 (1.2 %) Spliced: ----------------------------------------------- Total PE seqs: 1184360 PE seqs mapped: 547664 (46.2 %) Num PE pairs: 592180 F5 1st end mapped: 300477 (50.7 %) F3 2nd end mapped: 247187 (41.7 %) PE pairs mapped: 241180 (40.7 %) PE proper pairs: 236557 (39.9 %) ----------------------------------------------- Insert size stats for: yeast_chip Number of pairs: 236557 (proper) Number of insert sizes: 212 Mean [-/+ 1 SD]: 215 [153 277] (sd 62) Mode [Fivenum]: 223 [105 210 220 229 321] -----------------------------------------------
Since this was a paired end alignment there is paired-end specific information reported, including insert size statistics: mean/standard deviation, mode (most common insert size value) and fivenum (min, q1, median, q3 max insert sizes).
A quick way to check alignment stats if you have run multiple alignments is again to use grep. For example, for the 6 alignment files shown earlier, running this:
grep 'Total map' *samstats.txt
will produce output like this:
delswr1_htz1_tap1t0.samstats.txt: Total mapped: 32761761 (86.8 %) delswr1_htz1_tap1t15.samstats.txt: Total mapped: 33699464 (89.2 %) delswr1_htz1_tap1t30.samstats.txt: Total mapped: 28441655 (87.6 %) wt_htz1_tap1t0.samstats.txt: Total mapped: 28454847 (89.5 %) wt_htz1_tap1t15.samstats.txt: Total mapped: 33245627 (90.9 %) wt_htz1_tap1t30.samstats.txt: Total mapped: 32567026 (90.7 %)
The great thing about pipeline scripts like this is that you can perform alignments on many datasets in parallel at TACC.
Anna's alignment pipeline scripts are written to take advantage of having multiple cores on TACC nodes, and are thus designed to run with at most two pipeline commands per TACC node.
These pipeline scripts should always be run with a wayness of 2 (-w 2) in the TACC batch system, meaning two commands per node.
Assuming you have your alignment commands in a file called aln.cmds, here's how to create and submit a batch job for the commands.
launcher_creator.py -n aln -j aln.cmds -t 12:00:00 -q normal -w 2 sbatch aln.slurm showq -u
Note the maximum run time specified here is 12 hours (-t 12:00:00). This is a reasonable value for a higher eukaryote with 20-40 M reads, and is way more than a yeast alignment would need (~ 4 hours). For very deeply sequenced eukaryotes (e.g. human genome re-sequencing with hundresd of millions of reads), you may want to specify the maximum job time of 48 hours.
Exercise: What would alignment commands look like if you were putting it in a batch system .cmds file?
Assuming you have $path_code set properly before submitting the job, the batch command would look like the command above, but you don't need the tee pipe. Instead, just redirect all output to a file. The example below shows how you would run alignments on two yeast samples in a batch file, adjusting the output prefix (yeast1, yeast2) and log file (aln.yeast1.log, aln.yeast2.log) accordingly.