Calling variants - a trivial use of an Interactive Session

Introduction

Variant calling, at first glance, is pretty simple: Map sequence reads to an appropriate reference, emitting BAM files; Generate pileups and look for evidence of structural variation; Correct for false-positives due to the sequencing technology. Common file formats used in variant detection are:

• BAM files containing alignments against a reference genome
• Reference FASTA files containing genome sequence
• VCF files to represent SNPs and small indels
• BED files for specifying regions of the genome

Setting up

Go to the Terminal shell window in which you have launched an idev session:

1. Set your BASE variable
   1. export BASE=/scratch/01374/vaughn/tacc_ngs
2. mkdir $WORK/variants && cd $WORK/variants
3. Copy your own BWA alignment file into place: cp $WORK/bwa-align/hs37d5_allseqs_bwa.bam .
4. Load up the modules we will need for this session
   1. module load samtools && export PATH=$PATH:$TACC_SAMTOOLS_DIR/bcftools

Now, we're ready for some variant-hunting!

Alignment statistics

Before diving into interpretation of bioinformatics results, it's nice to get some summary statistics. SAMtools has a tool 'flagstat' that makes it easy to do this for BAM files. Run samtools flagstat hs37d5_allseqs_bwa.bam and you should get:

4546280 + 0 in total (QC-passed reads + QC-failed reads)
0 + 0 duplicates
3992174 + 0 mapped (87.81%:nan%)
4546280 + 0 paired in sequencing
2273140 + 0 read1
2273140 + 0 read2
39866 + 0 properly paired (0.88%:nan%)
3636642 + 0 with itself and mate mapped
355532 + 0 singletons (7.82%:nan%)
45710 + 0 with mate mapped to a different chr
16050 + 0 with mate mapped to a different chr (mapQ>=5)

Basic variant calling

Variant calling is basically a three-step process:

1. First, samtools mpileup command transposes the mapped data in a sorted BAM file fully to genome-centric coordinates. It starts at the first base on the first chromosome for which there is coverage and prints out one line per base. Each line has information on every base observed in the raw data at that base position along with a lot of auxiliary information depending on which flags are set. It calculates the Bayseian prior probability given by the data, but does not estimate a real genotype.
2. Next, bcftools with a few options added uses the prior probability distribution and the data to calculate an actual genotype for the variants detected.
3. Finally, vcfutils.pl (or equivalent) is used to filter down the list of candidates according to some set of objective criteria.

Here's a basic set of commands to generate a BCF of genotypes.

First, be sure the BWA file is sorted and indexed

samtools sort hs37d5_allseqs_bwa.bam hs37d5_allseqs_bwa-sorted
samtools index hs37d5_allseqs_bwa-sorted.bam

Then, call variants and write to a VCF file

samtools mpileup -uf /corral-repl/utexas/BioITeam/tacc_ngs/human_variation/ref/hs37d5.fa \
   hs37d5_allseqs_bwa-sorted.bam \
   | bcftools view -vcg - > hs37d5_allseqs_bwa.raw.vcf

Open the 'hs37d5_allseqs_bwa.raw.vcf' file in a text editor and take a look around. Notice all the descriptive metadata in the comments (lines that start with the # character) - VCF is a very good format for bioinformatics!

Question: What version of the VCF standard is this file

Find the variant in chromosome 20 at position 1592284 in the VCF file (It is probably the first variant record in the file).

Question: What is the reference base for this SNP and what is the polymorhism?

Question: What is the read depth supporting this polymorphism?

Question: What is the quality of this SNP?

Inspecting base-level alignments

So, you've identified a variant chr20:1592284, it's got good quality and read support, and you want to verify it for yourself. You can use any number of BAM browsers (IGV, SeqMonk, etc) but you can also do this right from the terminal using a command bundled with samtools called 'tview'.

Enter the following command

samtools tview hs37d5_allseqs_bwa-sorted.bam /corral-repl/utexas/BioITeam/tacc_ngs/human_variation/ref/hs37d5.fa

You should see a window that resembles the following screen shot.

Hit the '?' key to pull up help, then hit '?' again to dismiss help. Let's go to the SNP we examined before. Type 'n' to turn on color coding of nucleotides. Hit 'g' and you will be asked to enter a position in the genome, then enter 20:1592284 in this box and hit 'Return' and you will be transported to the location in reference genome. The base 1592284 will be the left-most column in the BAM browser.

Filtering your VCF file

The vcfutils.pl script, bundled with bcftools inside SAMTools can provide useful stats and can perform some filtering of VCFs by specific criteria.

$TACC_SAMTOOLS_DIR/bcftools/vcfutils.pl qstats hs37d5_allseqs_bwa.raw.vcf

QUAL #non-indel #SNPs #transitions #joint ts/tv #joint/#ref #joint/#non-indel
91	30	30	7	0	0.3043	0.0000	0.0000	0.3043
74	60	60	15	0	0.3333	0.0000	0.0000	0.3636
62	91	91	21	0	0.3000	0.0000	0.0000	0.2400
54.5	122	122	30	0	0.3261	0.0000	0.0000	0.4091
49.1	153	153	41	0	0.3661	0.0000	0.0000	0.5500
45.3	183	183	45	0	0.3261	0.0000	0.0000	0.1538
40	225	225	60	0	0.3636	0.0000	0.0000	0.5556
37	257	257	70	0	0.3743	0.0000	0.0000	0.4545
34	295	295	78	0	0.3594	0.0000	0.0000	0.2667
31	329	329	90	0	0.3766	0.0000	0.0000	0.5455
28.5	359	359	98	0	0.3755	0.0000	0.0000	0.3636
26	396	396	109	0	0.3798	0.0000	0.0000	0.4231
24	427	427	116	0	0.3730	0.0000	0.0000	0.2917
22	459	459	131	0	0.3994	0.0000	0.0000	0.8824
21.8	555	555	166	0	0.4267	0.0000	0.0000	0.5738
20.6	586	586	179	0	0.4398	0.0000	0.0000	0.7222
19.8	621	621	187	0	0.4309	0.0000	0.0000	0.2963
18.8	655	655	197	0	0.4301	0.0000	0.0000	0.4167
17.8	694	694	213	0	0.4428	0.0000	0.0000	0.6957
16.9	736	736	227	0	0.4460	0.0000	0.0000	0.5000
15.9	766	766	242	0	0.4618	0.0000	0.0000	1.0000
14.9	804	804	252	0	0.4565	0.0000	0.0000	0.3571
13.9	850	850	271	0	0.4680	0.0000	0.0000	0.7037
13	890	890	283	0	0.4662	0.0000	0.0000	0.4286
12	945	945	302	0	0.4697	0.0000	0.0000	0.5278
11.1	996	996	320	0	0.4734	0.0000	0.0000	0.5455
10.2	1048	1048	343	0	0.4865	0.0000	0.0000	0.7931
9.31	1090	1090	358	0	0.4891	0.0000	0.0000	0.5556
8.44	1129	1129	367	0	0.4816	0.0000	0.0000	0.3000
7.59	1176	1176	385	0	0.4867	0.0000	0.0000	0.6207
6.79	1235	1235	409	0	0.4952	0.0000	0.0000	0.6857
6.02	1282	1282	429	0	0.5029	0.0000	0.0000	0.7407
5.29	1328	1328	446	0	0.5057	0.0000	0.0000	0.5862
4.61	1377	1377	464	0	0.5082	0.0000	0.0000	0.5806
3.98	1413	1413	480	0	0.5145	0.0000	0.0000	0.8000
3.41	1455	1455	495	0	0.5156	0.0000	0.0000	0.5556
3.01	1460	1460	495	0	0.5130	0.0000	0.0000	0.0000

Question: How many INDELs were identifed in your VCF file?

grep -c "INDEL" hs37d5_allseqs_bwa.raw.vcf
48

Why filter?
With any variant caller you use, there will be an inherent trade-off between sensitivity and specificity. Typically, you would carry forward as much data as practical at each processing step, deferring final judgement until later so you have more information. For example, you might not want to exclude low coverage regions in one sample from your raw data because you may be able to infer a genotype based on family information later. This typically leads to NGS pipelines that maximize sensitivity, leading to a substantial number of false positives. Filtering after variant calling can be useful to eliminate false positives based on all the data available after numerous analyses. In the samtools/bcftools world, the vcfutils.pl script provides a means to filter SNPs on many criteria.

Exercises

Now, you will explore some filter settings for vcfutils.pl varFilter to see how many SNPs get filtered out, using the linux tool xargs to do a parameter sweep.

# First - create a tiny shell script to run vcfutils, accepting a single parameter:

echo "#\!/bin/bash" > tiny.sh
echo "echo \"Sweeping with vcfutils.pl, min read depth of: \$1\" " >> tiny.sh
echo "$TACC_SAMTOOLS_DIR/bcftools/vcfutils.pl varFilter -Q 20 -d \$1 hs37d5_allseqs_bwa.raw.vcf | grep -v '^#' | wc -l " >> tiny.sh

# Now make it executable

chmod +x tiny.sh

# Use xargs to do a sweep of read depths

echo 2 3 4 5 6 7 | xargs -n 1 tiny.sh

Sweeping with vcfutils.pl, min read depth of: 2
1487
Sweeping with vcfutils.pl, min read depth of: 3
996
Sweeping with vcfutils.pl, min read depth of: 4
696
Sweeping with vcfutils.pl, min read depth of: 5
548
Sweeping with vcfutils.pl, min read depth of: 6
388
Sweeping with vcfutils.pl, min read depth of: 7
316

Homework: Try to update tiny.sh so that sweeps through Quality rather than read depth

Exercise questions

You can use bedtools and some Linux built-in commands to compare your vcf file to one generated by BioITeam staff using some other data and means (you will need module load bedtools).

Your file: hs37d5_allseqs_bwa.raw.vcf
BioITeam staff VCF file: /corral-repl/utexas/BioITeam/tacc_ngs/human_variation/all.samtools.vcf

*Question: How many SNPs are in your VCF file and the staff-generated VCF file?

grep -c -v "^#" hs37d5_allseqs_bwa.raw.vcf
1507
grep -c -v "^#" /corral-repl/utexas/BioITeam/tacc_ngs/human_variation/all.samtools.vcf
80972

Question: How many SNPs are in common between the two files?

intersectBed -a hs37d5_allseqs_bwa.raw.vcf -b /corral-repl/utexas/BioITeam/tacc_ngs/human_variation/all.samtools.vcf | wc -l
88

Question: What are the average and maximum quality values for the SNPs that are in your VCF file?

grep -v '^#' hs37d5_allseqs_bwa.raw.vcf | awk 'BEGIN {max=0} {sum+=$6; if ($6>max) {max=$6}} END {print "Average qual: "sum/NR "\tMax qual: " max}'
Average qual: 22.85	Max qual: 113