View Source

Power cycling the TV switcher rack takes several minutes. If you have to move or power cycle the rolling TV switcher from BMC2.106BA, reset the following:

AJA Ki Pro

In the Ki-Pro, click Config > Menu 2.1 Video Input = HDMI
In the Ki-Pro, click Config > Menu 2.2 Audio Input = HDMI
In the Ki-Pro, click Media > Menu 14.1 Record Type = set recording quality desired

Codec	Bitrate	Hours @ 250GB Harddrive
ProRes 422 HQ	220Mb/s	2 Hours
ProRes 422	140Mb/s	2-3/4 hours
ProRes 422 LT	100Mb/s	4-1/4 hours
ProRes 422 PX	45Mb/s	9 hours

Aja FS2

These settings should stay set during a power outage. However, if they need to be reset, these are the settings.

This device serves 3 purposes:

PGM Audio embedder - combines Switcher PGM SDI via Input 1A with analog audio from Beringer rack mixer to output on HDMI
Down Convert Embedded Program to SDI (FS2 output 2B feeds Composite Video to jackpanel)
HDMI Aux in converter to HDSDI - jackpanel HDMI in comes in to Switcher input 12 via FS2 SDI output 1A

FS2 Connection	Function	Cable #
SDI In 1A	SXR PGM Out	DV8043
SDI In 2B	none	none
HDMI In	Convert Jackpanel Aux HDMI In to SDI Switcher Input 12	DV8202
SDI Out 1A	Converted Jackpanel Aux HDMI In to SDI Switcher Input 12	DV8012
SDI Out 2B	Embedded HDSDI PGM video on Jackpanel	DV8221
HDMI	Embedded HDMI PGM to HDMI 1x4 DA to recording Devices	DV8223

FS2 Menu settings should be:

SDI1 Out = Processor1
SDI2 Out = Processor2
HDMI Output = Processor2
Input 1 = HDMI
Input 2 = SDI1
HDMI Audio Out = Ch1-8
AES-EBU = Processor1
Analog Audio Out = Ch1-8
Audio1 (button) embedded audio out = off
Audio1 (button) audio input = analog
Audio2 (button) embedded audio out = on
Audio2 (button) audio input = analog