Page History
...
Launch ProTools | Open a session | ||
Check the Playback Engine> go to >Setup>Playback Engine | |||
Make sure the HDMI output is selected and you will need to restart if it is not already selected | |||
Click on >Setup>I/O | |||
Click on the 5.1 path order and make sure the L, R, C, LFE, Ls and Rs are selected | |||
Select all the ouputs and delete them. | |||
After all the outputs are selected click delete path | |||
Click Delete | |||
Click on "New Path" | |||
Choose to create 1 new track 5.1 and path = Output | |||
The channels will auto populate | |||
Click OK to Apply | |||
Go to >Track>New | |||
Create one new 5.1 audio track – Create | Better yet create a mono track and create some pink noise on the track to test | ||
On the new track select a span of the clip to create the white noise on | |||
Go to AudioSuite>Other>Signal Generator | |||
Choose Pink Noise | |||
Make sure the Output is Yellow and set to Output 5.1 output | |||
Go To >Window> | |||
In the mix window on the track with the 5.1 output you will see the "Multi Channel" Panner window | |||
To see the Multichannel fader larger click on the mini fader | |||
This will open the surround window | |||
Note to check LFE | |||
Go to Output> |