RODECaster Pro - First Steps

If you are using the RODECaster with your computer to record in
a DAW, such as Pro Tools or Audition, or plan to playback audio
from your computer to the RODECaster, make sure the USB cable is
connected between the RODECaster and the computer.

How would you like your audio recorded?

Stereo vs Multitrack

Stereo mixes all your tracks together into a left and right track
and is easy to upload out of the box without any post work.

Multitrack on the other hand records each source to a separate track,
providing you with 14 tracks in total (Main out, USB, Phone, BT, and SFX
are split into left and right channels) for the ultimate control in post
editing and touch up. Keep in mind, this type of recording may not work
very well if the end recipient's device does not auto mix them into stereo,
so it is suggested to edit multitrack after recording and create your own
stereo version.

To set which version you would like:

1. Tap on the Settings button on the top corner of the LCD Screen
2. Then click Advanced > Audio > Multitrack
3. On the final page, you will have the choice to enable multitrack on
   the SD Card recording and / or the USB output.
   

• The Multitrack is ordered as such:
  1. Main Left
  2. Main Right
  3. Mic 1
  4. Mic 2
  5. Mic 3
  6. Mic 4
  7. USB Left
  8. USB Right
  9. Phone Left
  10. Phone Right
  11. Bluetooth Left
  12. Bluetooth Right
  13. SFX Left
  14. SFX Right

Do you plan to playback any audio from your computer?
Go into the computer's speaker / microphone settings and make sure
Speakers is set to RODECaster Pro Stereo. This will forward any sounds you play
to the USB input on the RODECaster.