JAMF - How to un-enroll a computer / Delete the MDM Profile (User-initiated & Prestage enrolled)

User Initiated

Login to the computer as an administrator (ex commpower)
Open a terminal window
Type the following command: sudo jamf removeFramework
Enter the admin password
It should list the different pieces that it is removing
Once it is complete, open the system settings and navigate to Profiles. Double check that the MDM Profile and any other profiles related to jamf are removed

If you know System Integrity protection is already disabled, skip this step. Reboot the computer into recovery mode If you have to, select an admin account presented and enter the password Go to Utilities on the top left of the page and select Terminal Enter the following command: csrutil disable It should confirm that System integrity is disabled, and tell you to reboot Enter the following command: reboot now
Login to the computer as an administrator (ex commpower)
Open a terminal window
Type the following commands: cd /Volumes/Macintosh\ HD/var/db/ConfigurationProfiles/ Replace "Macintosh\ HD" with your system partition if it is different. If there is a space or special characters, add an \ before. (ex Kat\'s\ HardDrive) sudo rm -rf Store/ && sudo rm -rf Settings/ && sudo rm -f .profilesAreInstalled
Enter the admin password
once the prompt returns, enter this command to reboot the computer: sudo reboot now
Once the computer finishes rebooting, login and check for profiles in System settings