1. Record ProRes with the AJA Ki Pro Mini | |
---|---|
To record a ProRes file you will use the Ki Pro Mini located in the Engineering Rack. The Ki Pro Mini uses CF (Compact Flash) cards, which can be reserved and checked out from Equipment Checkout located in CMA 3.104 |
← Engineering Rack
AJA Ki Pro ↓
|
Gently insert the compact flash card into the Ki Pro Mini. There are two slots located on the side of the Ki Pro. It does not matter which one you use. It should easily go 3/4 of the way into the Ki Pro. | |
Make sure the Ki Pro Mini is powered on. | |
Format the CF card | |
To format a CF card press the Media Button. | |
Using the SELECT up/down arrows, navigate to the MEDIA menu > Format Media. | |
Use the ADJUST UP button to select FORMAT. |
|
Press the ADJUST UP arrow button again. Ki Pro Mini will display "ERASE S1 [or S2]". Press and hold the ADJUST UP arrow button for 2 seconds and formatting will begin. | |
The Ki Pro Mini will begin to format the CF card. and will display Format S(x) Complete once it is complete. | |
Starting and Stopping a Recording | |
When you are ready to begin recording, push the Red Record button. | |
While recording, the Ki Pro Mini will display a percentage readout indicating how much recording space is left on the card. | |
To stop a recording, push the STOP button. | |
Once the recording has stopped, press the SLOT button to release the card from the recording device. This will ensure your recording does not get corrupted while removing the card from the recorder. After you have pressed the SLOT button and verified the green light above the power button has gone off. Power off the Ki Pro. Press and hold the POWER button until the unit has powered off. | |
After you have powered off the Ki Pro, you can now safely remove the compact flash card from the Ki Pro mini. Directly next to the card is the eject button for the compact flash card. Firmly press the eject button and remove the card.
|
2. Stream to YouTube and Record (to USB) web-ready H.264 with the Teradek Vidiu Pro | |
---|---|
You can stream Live to YouTube and record to a USB flash drive simultaneously.(YouTube link for live stream -- https://www.youtube.com/collcomm/live)
To STREAM and RECORD: Insert a flash drive into the PGM RECORD USB insert on the front of the rack. (USB flash drives are attached to the front of the rack) Press the RED button on the front of the Teradek unit. Use the same (joystick) button to navigate to YES, and press the button inward. This will begin STREAMING and RECORDING at the same time.
To Stream ONLY: Then simply hit the RED REC button without inserting a USB Flash drive into the PGM RECORD USB slot.
USB flash drives must be formatted as FAT 32 | ← Engineering Rack
Matrox Monarch HD ↓
|
To START a recording press the RECORD button. To STOP a recording press the RECORD button again.
|