This page is under construction

The Department Conference Room has a ceiling mounted projector, an AV control console, conference computer, web conference camera with three table top microphones, and a conference phone

NOTE: The room web conference camera and microphones are connected to the room computer

• Use the AV console to turn on the projector and lower the screen. Tap the console screen to wake it up.
• If encountering issues with the AV see the troubleshooting section below
  
  
  
  
• There is wireless keyboard and mouse connected to the room computer
• Use the USB hub on the AV cabinet to connect USB devices to the room computer
  
  
  
  
• Select Display HDMI to use a laptop. Connect the HDMI cable to the laptop. If necessary use one of the items on the HDMI adapter ring.
  
  
• Select Camera on the AV console to use the room web camera and microphones
  
  
  
  
• Use the camera menu to pan-tilt-zoom (PTZ) web camera
• ← back arrow button returns to home menu
  
  
• In the video conferencing software, select TesiraFORTE as the input and output devices
• The microphones are stored in the table pockets
  
  
  
  
• Select End to turn off the projector and raise screen
  
  

Troubleshooting Issues

• Computer is asleep
• Wireless keyboard or mouse not working
• HDMI connection not working

Computer is asleep

• If the console flashes the message to wake up installed computer, check if computer is turned on
  
  
  
  
• The computer is accessible from the front of the AV cabinet. The power button is on the left.
  
  
• Select correct input/output devices
• If HDMI connection is not working, check the power adapter under the table
• <insert power brick pic>

Wireless keyboard or mouse not working

• Check the power switch is on the bottom of the device
• Check that the wireless receiver is plugged into the USB hub
• Check that the USB hub is plugged into the computer
• Replace the keyboard or mouse batteries
  
  

HDMI connection not working