*The purpose of this wiki is to document the dimmer locations for each studio as patched in the CMB 5th (STRAND) and CMB 6th (ETC) floor dimmer rooms. The labeling has mostly been updated, but the below documents reference the new versus legacy labeling system.
*The Strand dimmers use a one-to-one system for their circuitry, where as the ETC systems require the attached documents below to connect the dimmer module to circuit association.
Please use the documents below to translate and cross-reference to patches and locations. Patched circuits can use dimmer modules to energize conventional studio light fixtures via an approved DMX lighting console.
|CMB STUDIO||LIST||Floorplan JPG|
|STUDIO 4A (CMB 4.116)||Studio_4A_Patch-Circuit.xlsx|
|STUDIO 4B (CMB 4.118)||Studio_4B_Patch-Circuit.xlsx|
|STUDIO 4C (CMB 4.122)||Studio_4C_Patch-Circuit.xlsx|
|STUDIO 4D (CMB 4.126)||CMB 4.126 Studio 4D Lighting Patch Listing|
|STUDIO 4E (CMB 4.128)||Studio_4E_Patch-Circuit.xlsx|
|STUDIO 6A (CMB 6.102)||Studio_6A_Patch-Circuit.xlsx|
|STUDIO 6B (CMB 6.112)||Studio_6B_Patch-Circuit.xlsx|
For information on using these lists and patching circuits in a studio with a lighting board click here