| Open Audio MIDI Setup |
|
Click on HDMI > Output and make sure The Source is Crestron Format is 8 Ch 24 Bit 48kHz |
|
| Open Davinci Resolve |
|
When you get trough the prompts Open a New Project or Existing Project |
|
| Click on Media Tab and add 5.1 clips to media pool |
|
Find the 2K clip with the 5.1 interleaved audio that was exported Right click it and choose "Add into Media Pool" |
|
Choose to Change the frame rate Click "Change" |
|
| Next - Go to the Edit Tab |
|
Right click in the Media Pool area >Choose >Timeline>CreateNew Timeline |
|
Set the Timeline to be 1 Video Track 1 audio track that is 5.1 Uncheck Empty Timeline Click on "Create" |
|
| Next go to >Fairlight>Bus Format |
|
Choose Format 5.1 Click on OK |
|
| choose the Fairlight tab at the bottom of the application to enter the Fairlight mode |
|
| In the Fairlight mode click on Fairlight>Patch Input/Output |
|
>Patching Interface opens On Source Choose Main Out |
|
| This is how the Patch Input/Output should look |
|
Next select source channels L, R, C, Lfe, Ls, Rs in this order by clicking on the channels Then on Destination click on channels 1-6 in order They will have a white border around the boxes like this |
|
| Then click on Patch |
|
Now you see the patches are correct for 5.1 monitoring close the window |
|
Now play the timeline you will see the 6 channels playing back like this |
|
On the Crestron Touch Panel to test the output Choose Advanced and then Surround Sound If you don't see this button You are not in a surround sound room that will play in 5.1 multi channel |
|
Keep at Auto and you should be able to mute channels as needed to check the audio. |
|
Overview
Content Tools
