Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


  • Use the AV console to turn on the projector and lower the screen. Tap the console screen to wake it up.
  • If encountering issues with the AV see the troubleshooting section below

  • There is wireless keyboard and mouse connected to the room computer
  • Use the USB hub on the AV cabinet to connect USB devices to the room computer

  • Select Display HDMI to use a laptop. Connect the HDMI cable to the laptop. If necessary use one of the items on the HDMI adapter ring.

  • Select Camera on the AV console to use the room web camera and microphones

  • Use the camera menu to pan-tilt-zoom (PTZ) web camera
  • ← back arrow button returns to home menu

  • In the video conferencing software, select TesiraFORTE as the input and output devices
  • The microphones are stored in the table pockets

  • Select End to turn off the projector and raise screen



Troubleshooting Issues

  • Computer is asleep
  • Wireless keyboard or mouse not working
  • HDMI connection not working

Computer is asleep

  • If the console flashes the message to wake up installed computer, check if computer is turned on

  • The computer is accessible from the front of the AV cabinet. The power button is on the left.

  • Select correct input/output devices
  • If HDMI connection is not working, check the power adapter under the table
  • <insert power brick pic>If wireless

Wireless keyboard


or mouse


not working

  • Check the power switch is on the bottom of the device
  • Check that the wireless receiver is plugged into the USB hub
  • Check that the USB hub is plugged into the computer
  • Replace the keyboard or mouse batteries

HDMI connection not working