Page History

...

Use the AV console to turn on the projector and lower the screen. Tap the console screen to wake it up.
If encountering issues with the AV see the troubleshooting section below
Expand
title AV Console Image
There is wireless keyboard and mouse connected to the room computer
Use the USB hub on the AV cabinet to connect USB devices to the room computer
Expand
title USB Hub Image
Select Display HDMI to use a laptop. Connect the HDMI cable to the laptop. If necessary use one of the items on the HDMI adapter ring.
Select Camera on the AV console to use the room web camera and microphones
Expand
title Camera Controls Image
Use the Power On button to turn the camera on
Use the camera menu to pan-tilt-zoom (PTZ) web camera
← back arrow button returns to home menu
In the video conferencing software, select TesiraFORTE as the input and output devices
The microphones are stored in the table pockets
Expand
title Microphone Image
Select End to turn off the projector and raise screen
Expand
title End Screen Image

...

Troubleshooting Issues

...

If the console flashes the message to wake up installed computer, check if computer is turned on
Expand
title Wake Up Computer Image
The computer is accessible from the front of the AV cabinet. The power button is on the left.
Expand
title Room Computer Image
If the power button is on and computer is not displaying, press the power button for 10 seconds until the computer turns off. Wait a couple of seconds then press button to turn computer back on

No camera video

If no camera video, confirm the camera is powered on
Expand
title Camera Power On button
Image Added
The computer is accessible from the front of the AV cabinet. The power button is on the left.

Wireless keyboard or mouse not working

...

Use a paper clip to press the hardware reset (HW-R) button on the video controller located in the AV cabinet.
Expand
title Video Controller Image