...
Cut | Score | |||||||
---|---|---|---|---|---|---|---|---|
Material | Depth | Power | Speed | PPI | Power | Speed | PPI | Quality |
Acetate* | 25* | 25* | ||||||
Acrylic | 1/4" | 95 | 2.5 | 400 | ||||
Balsa | 1/8" | 85 | 15 | |||||
Basswood | 1/16" | 40 | 10 | Charred edges, orange tinting without protective paper masking | ||||
1/8" | 60 | 5 | ||||||
Bristol | 2 ply | 40 | 55 | 10 | 45 | |||
4 ply | 70 | 25 | ||||||
Chip | 1 ply | 90 | 10 | 45 | 60 | Charred edges | ||
2 ply | 80 | 20 | 380 | 50 | 50 | 380 | ||
4 ply | 90 | 10 | 80 | 20 | ||||
Cork | 1/8" | 50 | 10 | 380 | ||||
Cork | 1/4" | 85 | 15 | 380 | ||||
Corrugated cardboard | 1/8" | 50 | 10 | |||||
Crescent | 65 | 20 | 20 | 40 | ||||
Felt | 1/8" | 80 | 10 | 380 | Natural fibers will have charred edges and a strong smell | |||
Felt | 1/4" | 85 | 5 | 380 | ||||
Lucite |
| |||||||
Masonite | ||||||||
MDF (medium-density fibreboard) | ||||||||
Museum Board | 2 ply | 70 | 17 | White board = charred edges | ||||
4 ply | 85 | 15 | 380 | 40 | 30 | 380 | ||
Mylar | ||||||||
PE | ||||||||
PETG | 1/64" | 25 | 12 | 380 | ||||
Plexy (cut twice) | 3/32" | 70 | 8 (cutx2) | |||||
0.118 | 70 | 5 (cutx2) | ||||||
1/8" | 100 | 3 | 500 | 85 | 25 | 500 | ||
3/16" | 100 | 2 | ||||||
Polyester | ||||||||
Plywood | 1/2" max | 100 | 1.5 to 4 | 380 | Glue pockets may prevent complete cut through in some areas | |||
Rubber (no-odor | Must be specially marked for laser cutting | |||||||
Strathmore | 40 | 25 | 380 | 10 | 25 | 380 | ||
Vellum | ||||||||
Mahogany | 1/8" | 85 | 1 | 400 | ||||
Walnut | 1/8" | 100 | 1 | 400 |
*Use this setting with caution. Try out a range of settings on a test piece first
...