...
- Lexan
- Polyurethan
- PVC
- Styrene
- Polycarbonate
- Vinyl
- Glass
- Foam Core
- Foam board
- Metal*
Use of prohibited materials could result in the material melting to the laser cutter bed or the release of toxic fumes. Due to the severity in risk, cutting prohibited materials will result in loss of lab privileges and possible fines for damages. Please note that the Co-op sells material that looks like acrylic but is made of PVC and styrene.
...
Another good resource: http://atxhackerspace.org/wiki/Laser_Cutter_Materials
*Our laser cutters can etch certain metals; They cannot cut metal.
Acceptable Materials
Generally, speeds below 20 and PPI at 380 are recommended. Please do a materials test before every new cutting session to determine the proper levels for your material by trying a variety of levels to cut and etch.
...