ProTools - ProTools Audio Monitoring Setup in CMB Grad Hallway Edit Labs

Unplug the thunderbolt cable to Black Magic Design Thunderbolt Shuttle RESTART THE COMPUTER Plug in the thunderbolt cable Blackmagic Shuttle is connected via the Thunderbolt cable to the computer. Make sure the Headphones are plugged into headphone jack on IMac
Use the TV Remote> Turn on the Monitor and make sure you select the HDMI input
Go to >Apple>System Prefs
System Prefs>Sound>Output>Make sure it is set to Headphones
System Prefs>Blackmagic Desktop Video and click on it
Make sure you see the Intensity Shuttle Thunderbolt
Launch ProTools
When ProTools opens click "Cancel" on the Quick Start Dialog. We do not want to open a session yet. Need to set up the routing and Playback Engine first.
Go To Setup > Playback Engine
On the Playback Engine Drop Down choose Built-in Output Click OK
Now go to Input and Output setup Go to >Setup>I/O
Click "Defautl" on the I/O setup Then Click OK
Now that the routing and hardware is set up open the ProTools session if you have one created already or make a new session.
Navigate to the session and open it
Next Import the video into the project Choose Import Video
Navigate to the video file that you want to view in the ProTools session
Choose to import at Session Start
Choose to enable the Video Engine Click Yes here
If you would like to use the audio off the video file choose to save it to the default Audio Drive folder
Last step is to open up the Input and Output view in ProTools Go to > View>Edit Window Views> I/O >
Choose the format 1080 or 720 23.98fps Choose the Playback Quality - Note if there is stuttering choose Draft but Full should work