Check that the WHITE Thunderbolt cable is plugged into the IMac |  |
| Make sure the other end of the WHITE - Thunderbolt cable is plugged into the Blackmagic Design Intensity Pro as shown here. |  |
| Log into the computer | |
|
|
|
|
Click on Settings Button |
|
Click on Video> |
|
Click on Audio Tab > Click on RCA |
|
Select Sound
|
|
Select Output Tab > Blackmagic Audio |
|
If you have video you would like to use in your protools session turn on the TV MAKE SURE THAT THE SOURCE IS SET TO COMPONENT -
|
|
PRESS THE SOURCE BUTTON UNDERNEATH THE "9" KEY TO SET INPUTS ON THE MONITOR - Don't change this should be set correctly but just in case it should be set to component input. |
|
Select the application that you want to run AVID or Davinci Resolve or Premiere |
|
| Choose "Premiere Pro CC > Preferences > Playback..." |  |
Choose Blackmagic Playback
Click OK |  |
| Choose "Premiere Pro CC > Preferences > Audio Hardware..." |  |
| Make sure you Preferences look like this |  |
| If you get this error click Yes |  |
| Click OK | |
Don't forget to pan channel 1 LEFT & channel 2 RIGHT and don't use any other tracks |  |
USE ONLY TRACK MIXER not CLIP MIXER |  |
Some of the Suites on the 1st floor have a Mixer. The mixer settings are shown here.
Channel 1 and 2 are AVID playback are ProTools playback
Also turn up the Master audio on the Board labeled Volume |
Overview
Content Tools
