We recommend the following large diaphragm condenser mics:
Neumann TLM 103 or U87
Audio Technica 4050 or 4033
For more information on available microphones, check out the Microphone Information Table
| The side with the Mic's emblem is the side you speak into. |
|
| The basement of CMB has a low rumble to it starting at around 150Hz on down. The rumble is even present in the isolation booth. |
|
Mount the microphone on the mis stand. |
|
| Plug in XLR cable out of the mic... |
|
| ...into the wall jack. |
|
| Attach the pop filter. |
|
| Make sure the setting on the front of the HD OMNI look like this |
|
| Launch ProTools |
|
Overview
Content Tools
