The University Wiki Service has upgraded the Confluence Server software, from version 5.9.14 to 5.10.8. Please refer to the knowledge base article, KB0015891, for a high level summary of upgrade changes. Thank you!

Page tree
Skip to end of metadata
Go to start of metadata
Grip Equipment

Drillable Apple Boxes

Pancake (left):

12”x3”x20” wooden box

 

Half (center):

12”x6”x20” wooden box

 

Full (right):

12”x8”x20” wooden box

Raising actors, furniture, for sitting or standing.  These can be drilled into, if needed.

Non Drillable Apple Boxes

Pancake (left):

12”x1”x20” wooden box

 

Half (center):

12”x4”x20” wooden box

 

Full (right):

12”x8”x20” wooden box

Raising actors, furniture, for sitting or standing.  These CANNOT be drilled into.

American Stand DOUBLE Riser

Stand with 7 knobs and small spuds

Raising heavy lights

American Stand TRIPLE riser

Stand with 8 knobs and small spuds

Raising heavy lights

C-Stand Tall

Very tall Century stand with gobo arm, gag, and knuckle

C-Stands are for holding diffusion in front of lights, NOT for lights to be held on

C-Stand

see above

Century stand with gobo arm, gag, and knuckleC-Stands are for holding diffusion in front of lights, NOT for lights to be held on

C Stand Mole Short

see above

Short Mole stand with gobo arm, gag, and knuckle C-Stands are for holding diffusion in front of lights, NOT for lights to be held on

C Stand 30”

see above

Avenger 30" C Stand with removable black turtle base,
40" black gobo arm and grip head
C-Stands are for holding diffusion in front of lights, NOT for lights to be held on

C Stand Tiny

see above

Avenger 20" C-Stand with Avenger turtle base, 20" gobo arm and grip headC-Stands are for holding diffusion in front of lights, NOT for lights to be held on

Low-Boy Riser

Part of the Dana Dolly Kit!

Raising or Holding the Dana Rails.

Rolling Stand (Small)

Stand with Baby Spud

 

For rolling support of 1K’s, In betweenies, Mole

Rolling Stand (Large)

see above

Stand with Junior (1 1/8”) female

For rolling support of HMI lights

Lightweight Blade Stand

Light weight stand for lights

For Static support of 1K’s, In betweenies, Mole Solarspots

Lightweight Black Blade Stand

see above

Light weight stand for lights

For Static support of lights less than 1K

C Clamp

Clamp with no spuds

Holding together flats and other surfaces

Baby C Clamp

see above

Silver Matthews clamp with 5/8” baby spud

Holding together flats, clamping onto surfaces and attaching lights to the spuds.

Pipe Clamp Small

Clamp with 5/8” small spud

For mounting onto tables, pieces of wood, flat surfaces and being able to mount small lights on spuds.

Pipe Clamp Large

see above

Clamp with 1 1/8” large spud

For mounting onto tables pieces of wood, flat surfaces and mounting bigger lights then small pipe clamps

Mafer Clamp

Clamp with snap in pin for 5/8” Mafer

For clamping onto surfaces with more control, spud for mounting a small light, more flexible than gaffer grip.

Double Convi Clamp

see above

Kupo Double Convi Clamp with 5/8" spud.

For Clamping a wide variety of materials together at a right angle.

Scissor Mount

Mount with scissor like lock

Locks into place, can mount a light on it.

Gaffer Grip

Grip with 2 spuds.  Also called alligator clamp.

For mounting small lights on spuds

Cardellini Double Spud Clamp

Jaw clamp with 5/8 spud on both ends

For grabbing objects which are then mounted on a C Stand

Cardellini End Jaw

see above

Jaw clamp on one end and 5/8 spud on other endFor grabbing objects which are then mounted on a C Stand

Cardellini Mic Mount

see above

Jaw clamp on one end and microphone mounting threads on the other endFor grabbing objects which are then mounted on a C Stand

Mathelini 6” End Jaw

see above

Jaw Clamp on one end and 5/8 spud on other endFor grabbing objects which are then mounted on a C Stand

Pony Clamp

Metal clamp with spring operated jaws.  Orange or Blue.

Spring-operated jaws hold any material quickly and efficiently.

Larson Universal Clamp

Clamp with 2 knobs and 2 washers--one washer is smooth and the other washer has teeth.

Clamp a flag in it, then attach clamp to a Mafer clamp.

Duckbill Clamps

Clamp with 5/8 spud

For holding foam core reflectors in place.  Can also be used for lite disc reflectors

Cantrell Holder

A 3/8” shaft threaded at one end with square plates attached.

The foam core is "speared", and the white plate is then mounted on the foam with the wing nut. The shaft may then be mounted into a grip head, and the foam core placed and held in position on any stand.

Bread Board Holder

see above

3/8” shaft threaded at one end with square plates attached.  The corners are bent in. 

Baby to Spud Adapter

5/8 to 1 1/8 adapter

To use a light with a baby adapter on a light stand with only a larger spud….

Baby Offset Arm

 

For attaching two lights to a stand

Magic Arm

Fully articulated arm with 90° pivoting and 360° rotating ends, an elbow that rotates 360°. It has 5/8 studs on ball joints at both ends.

 Allows partial loosening for safe and precise positioning of a light head.  Load Capacity 6.61 pounds

Safety Cable

Bundles of wire in groups of 10

For fastening equipment in trucks for transport and on sets, to act as second safe fastener for lights attached to ceilings or overhead.

Dollies and Dolly Accessories

Wedges

Set of wooden wedges in green (11), red (11), and black (11) crates.

To level out dolly track on uneven surface.

Track Wheels for Dolly

Set of 4 wheels to fit both American and Matthews dollies and Elemack track in purple 10 gallon storage bin with lid

To be put on dollies to ride on the dolly track

Dolly, American

Has 2-piece handle, 2 wings and 14 knobs. Blue (looks similar to Matthews Dolly)

 

For tracking shots

Dolly, Matthews

see above

Has 2-piece handle, 2 wings, and 10 knobs. Orange (Pictured)

For tracking shots

Dolly, Dana

The Dana Dolly kit includes the Dana Dolly with Mitchell base, a 75mm adapter, 100mm adapter, 150mm adapter, two track end brackets, a center support, a large washer and a multi-tool.

For Tracking shots

Dolly, Vector

For advanced classes only.  You must take a training class to use this item.

For tracking shots, also has boom feature

Gorillapod with Cineskates

Gorilla pod, Cinetics skates, skateplate

MAX weight is 5 Pounds!

For controlling camera movement

Light Kits

KinoFlo Diva

Diva light, Gel Frame,
Louver/Silver, Lollipop with Baby Receiver, Four 3200K compact bulbs, Four 5500K compact bulbs, 1 Full flozier, 1 lamp travel case

Lighting for interviews or sets

Lowell Rifa 250

Light fixture,
250 watt GCA bulb,
white diffusion cloth,
built-in power cable,
and extension cord

Lighting for interviews or sets

Lowell Rifa 500

Light fixture,
500 watt EHC bulb,
white diffusion cloth,
black egg crate,
built-in power cable,
and extension cord

Lighting for interviews or sets

Lowell DP

Lowell 500 watt open-faced tungsten with: barn doors
single scrim
half-single scrim
power cable

Lighting for interviews or sets

Mole 300 W Fresnel In-Betweenie

300W In-betweenie with barn doors

Lighting sets primarily

Cowboy Softbox

five (5) 45 watt bulbs = 2000 watt
power cable
softbox
light control
THIS IS A FRAGILE ITEM.

Lighting for interviews or sets

Softbox

Flashpoint SoftBox:
70 watt Fluorescent Light Unit with Built in 19.5 x 27.5 Silver Soft Box in its own fabric pouch
detachable AC Plug
Spiral Fluorescent 5500K Bulb (translates into 350 Watt)
white diffusion cloth
Lowell Light Stand

Lighting for interviews or sets

3 Light Fluorescent Kit

3-7' stands,
2 umbrellas (33 shoot-thru and 33 white umbrella with black back), 1- 5.5 reflector, 2 socket kits, 2 85watt and 1 45 watt fluorescent bulb rated at 5500 degrees Kelvin.

NOTE: USE A SANDBAG SO THE LIGHT DOESNT TIP OVER

Silverdome

Light head,
an OctoConnector,
500 watt tungsten bulb in cardboard sleeve, 1K bulb in cardboard sleeve, power cable, SilverDome softbox with four metal rods
one sheet of fabric diffusion
*Do NOT put lights away when hot.

Lighting for interviews or sets

Arri 150

Arri 150 light with attached power cable
4-way barn door
snoot
hard case

Lighting for interviews or sets

Arri 3 Open Face/Softlite Kit

Two Arrilite 600 fixtures, one Arri 650 fixture

three barn doors, three stands,
three single full scrims, three double full scrims, two chimera speed rings, two Chimera XS Video Pro Lightbanks, eight metal poles, two Chimera soft fabric egg crates, one dimmer.

 

Lighting for interviews or sets

Lowell Go Kit

2 250W Pro lights, 2 stands, 2 barn doors, 1 umbrella, 1 gel frame. I spare bulb, case.

Lighting for interviews, some sets

Lowell Tota Kit (Large)

3 tota lites, 3 AC cords, 3 stands, 1 spare bulb, 3 gel frames, 3 scissor mounts, 3 folding clamps, 3 heavy bar extension clamps, 4 flexible bar, 3 umbrellas
4 cutter, 2 scrims
1 mirrored cutter,
2 lobo clamp,  2 tota clamps, 3 L clamps,  instructions

Lighting sets primarily

Lowell Tota Kit (small)

3 tota light fixtures each has a scrim
3 stands
1 umbrella
3 extension cords
2 spare bulbs
gel frame
lobo clamp
Tota clamp
L-clamp
scissor mount
folding clamp
hard case

Lighting sets primarily

1K Open Face Strand

Orange, 1000w light with barn door, retaining ring and clip (comes in a case with a set of 2)

Lighting sets primarily

Teenie Weenie Kit

3 600W lights, 3 stands, 3 extension cords, 3 barn doors, 2 scrims, 1 spare bulb

Lighting sets primarily

Tweenie Softie Kit

2 mole 650W solarspots, 2 barn doors, 2 diffuser frames, scrim bag for tweenie with 2 half single, 2 half double, 2 single, 2 double scrims. Type 2981 softlite, 1 egg crate, 1 diffuser frame, 1 scrim bag with 1 single & 1 double scrim, 3 light weight stands, molded case.

Lighting sets primarily

Wescott Flex Light LED

LED Light that is flexible, can be bent.  Can also be mounted for stability. 1900 lux output. 1’x1’

 

NO BATTERY

Flexible LED lighting for interviews or lighting small spaces like inside a car.

Battery Powered Lights

Icelight

Small light shaped like a lightsaber!

Lighting a small space

Teenie Weenie Sungun

30V battery, DYG 250W bulb, 120v-30v cable, teenie weenie fixture, case.

Lighting in areas where you cannot use other lights because they need AC power. (i.e. outdoors)

Sungun Kit

(2) lights attached together with attached 4-pin power cable.
Comes with 12V12aH battery AND a battery charger.

Lighting in areas where you cannot use other lights because they need AC power. (i.e. outdoors)

Sungun Kit (Cine 60)

Sungun light with battery belt.

Lighting in areas where you cannot use other lights because they need AC power. (i.e. outdoors)

Single Lights

650 W Open-Faced Teenie Mole

650 Watt open-faced teenie mole, no barndoors

Lighting sets primarily

1K Fresnel (Type 407)

1000W Solarspot type 407 with yoke and barn doors Looks and performs like Cool Redhead below. The difference is the color of the fixture. The “Cool Redhead” is actually silver. While the Baby Solarspot is red.

Lighting sets primarily

1K Fresnel Cool Readhead (Type 3081)

1000W Solarspot type 407 with yoke and barn doors

Lighting sets primarily

1K Fresnel Snootable (Type 751)

1000W Snootable type 751 with barn doors

Lighting sets primarily

750 Watt Softlight “Baby Soft”

 

 

 

 

750W Baby soft light

Lighting sets primarily with a softer light

1K Softlight

see above

1000W softlight with large spud

Lighting sets primarily with a softer light

HMI and HMI Equivalent Lights (Restricted to classes above 366K)

200 HMI Digimole

1 200W HMI digimole head, 200W AC ballast, 1 4way barn door, 1 handle, molded case

Provides more powerful light than other lights on set, used to simulate daylight.

400 HMI (PAR)

400W joker HMI with electronic ballast, lamp head, 25 extension cable, four leaf barn door, case on wheels

Provides more powerful light than other lights on set, used to simulate daylight.

800 HMI (PAR)

Joker 800W light head, electronic ballast, cable, extension cable(25 feet), four leaf barn door, super wide lens with ring, medium flood lens with a ring, frosted glass beaker, white carrying case with lens bag

Provides more powerful light than other lights on set, used to simulate daylight.

575 HMI, Mole

Mole HMI 575W light with ballast, barn door, and cables

Provides more powerful light than other lights on set, used to simulate daylight.

1.2 HMI, Arri

Arri 1.2W HMI light with ballast, barn doors, and 50’ cable.

Provides more powerful light than other lights on set, used to simulate daylight.

1.2 HMI, Mole

see above

Mole 1.2W HMI light with ballast, barn doors, and 50’ cable.

Provides more powerful light than other lights on set, used to simulate daylight.

Hive Killer Plasma

Hive Killer Plasma HMI Equivalent light Kit.

1.2 HMI equivalent output

575W draw

Provides more powerful light than other lights on set, used to simulate daylight.

Jab Daylight LED

AadynTech Jab Daylight LED

575 HMI Equivalent Output

200W draw

 

Also does lightning Effects

Provides more powerful light than other lights on set, used to simulate daylight.

Profoto 400

Ballast with power cable, ProFoto head with attached cable,
metal transport cap *Do not put the cap on when the bulb is hot*
Softlight reflector, silver reflector

Lighting for interviews or sets

Lighting Control

Flags and Cutter

Cutter- 41”x10”

Extra Small- 12”x18

Small- 18”x24”

Large-24”x36”

 

(Extra Small now in Studios)

 

Blocking out light

Single Nets

Extra Small- 12”x18”

Small- 18”x24”

Large-24”x36”

 

(Extra Small now in Studios)

 

Diffusing light by 1 layer of net

Double Nets

Extra Small- 12”x18”

Small- 18”x24”

Large-24”x36”

 

(Extra Small now in Studios)

 

Diffusion light by 2 layers of net

Silks

Extra Small- 12”x18”

Small- 18”x24”

Large-24”x36”

 

(Extra Small now in Studios)

 

Diffusing light by 1 layer of silk

¼ Stop Silks

Small- 18”x24”

Large-24”x36”

Diffusing light by ¼ layer of silk.

Reflector, LiteDisc, 22” Silver/White

22” Reflector: Silver on one side, White on the other

Reflecting, blocking or diffusing light.

Reflector, LiteDisc 32” Silver/White or Silver/Gold

see above

32” Reflector: Silver on one side, White or Gold on the otherReflecting, blocking or diffusing light.

Reflector, LiteDisc 42” Translucent

see above

42” Reflector: TranslucentReflecting, blocking or diffusing light.

Reflector, LiteDisc 22” or 32” 5in1

see above

22” or 32” Reflector:  Translucent disc, silver reflector, gold reflector, silver/gold reflector and flag.Reflecting, blocking or diffusing light.

Reflector, LiteDisc 18” 8in1

see above

18” Reflector: Gold, sun fire, sunlight, silver, soft silver, white, black, and 2-stop diffuser coversReflecting, blocking or diffusing light.

4 in 1 reflector (rectangle)

20”x30” frame with silver, gold, white and black sides.

Reflecting, blocking or diffusing light.

Reflector Boards (2 in wooden box 24x24)

Wooden box with two 24”x24” reflectors

Reflecting light

Reflector Holder

19” to 48” collapsible Reflector Holder

To hold LiteDisc reflectors

4x4 Butterfly Kit

4X4 butterfly kit includes: one 4X4 flat frame, one 4’ double net, one 52" single net, one 52" silk, one 52" flag.

Reflecting, blocking or diffusing light.

6x6 Butterfly Kit

see above

6X6 butterfly kit includes: one 6X6 frame (4 poles), one 6’ double net, one 6’ single net, one 6’ silk, one 6’ flag.Reflecting, blocking or diffusing light.

8x8 Butterfly Kit

see above

8X8 butterfly kit includes: one 8X8 frame (4 poles), one 8’ double net, one 8’ single net, one 8’ silk, one 8’ flag.Reflecting, blocking or diffusing light.

Extension Cables/Studio Power Adapters

Extension Cord, heavy duty 25’

 12 gage Extension Cable.  Max 1500 Watts

Providing an extension for AC power.

Extension Cord, heavy duty 50’

see above

12 gage Extension Cable.  Max 1500 WattsProviding an extension for AC power.

Extension Cord, heavy duty 100’

see above

12 gage Extension Cable.  Max 1500 WattsProviding an extension for AC power.

Extension Cord, extra heavy duty 50’

see above

10 gage Extension Cable.  Max 1500 WattsProviding an extension for AC power.

Extension Cord, Quad (15amp Edison)

Edison to Quad Edison

Providing an extension for AC power.  Max 1500 Watts.  This is a GFCI cables and will not work with Diva lights.

Extension Cord, Quad (20amp Edison)

20amp Edison to Quad Edison.  This will not work in older houses or non-industrial buildings!

Providing an extension for AC power.  Max 1500 Watts.  This is a GFCI cables and will not work with Diva lights.

20 Amp to 20 Amp Studio Extension

20 Amp to 20 Amp Studio Extension

Providing a conversion from 20 Amp to Edison power.

20 Amp to Edison Duplex

see above

20 Amp to Edison DuplexProviding a conversion from 20 Amp to Edison power.

Jumper

see above

20 Amp to EdisonProviding a conversion from 20 Amp to Edison power.

50 Amp to Duplex or Quad

50 Amp to 2 or 4 EdisonProviding a conversion from 50 Amp to Edison Power.

Stage Pin

60 Amp to 4 Edison

Providing a conversion from Stage-Pin to Edison power.